[PATCH v3] thermal: rcar_thermal: Use platform_get_irq_optional() to get the interrupt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_optional().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
v2-v3:
* Fixed review comment pointed by Andy

v1->v2
* Simplified checking error code
* Break loop earlier if no interrupts are seen

v1: https://lkml.org/lkml/2021/12/18/163
---
 drivers/thermal/rcar_thermal.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index b49f04daaf47..e480f7290ccf 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -445,7 +445,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 	struct rcar_thermal_common *common;
 	struct rcar_thermal_priv *priv;
 	struct device *dev = &pdev->dev;
-	struct resource *res, *irq;
+	struct resource *res;
 	const struct rcar_thermal_chip *chip = of_device_get_match_data(dev);
 	int mres = 0;
 	int i;
@@ -467,9 +467,16 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 	pm_runtime_get_sync(dev);
 
 	for (i = 0; i < chip->nirqs; i++) {
-		irq = platform_get_resource(pdev, IORESOURCE_IRQ, i);
-		if (!irq)
-			continue;
+		int irq;
+
+		irq = platform_get_irq_optional(pdev, i);
+		if (irq < 0 && irq != -ENXIO) {
+			ret = irq;
+			goto error_unregister;
+		}
+		if (!irq || irq == -ENXIO)
+			break;
+
 		if (!common->base) {
 			/*
 			 * platform has IRQ support.
@@ -487,7 +494,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 			idle = 0; /* polling delay is not needed */
 		}
 
-		ret = devm_request_irq(dev, irq->start, rcar_thermal_irq,
+		ret = devm_request_irq(dev, irq, rcar_thermal_irq,
 				       IRQF_SHARED, dev_name(dev), common);
 		if (ret) {
 			dev_err(dev, "irq request failed\n ");
-- 
2.17.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux