Macros are easier to read than numerical values.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
drivers/media/i2c/max9286.c | 27 ++++++++++++++++++---------
1 file changed, 18 insertions(+), 9 deletions(-)
diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c
index 24c2bf4fda53..4b69bd036ca6 100644
--- a/drivers/media/i2c/max9286.c
+++ b/drivers/media/i2c/max9286.c
@@ -80,10 +80,13 @@
#define MAX9286_DATATYPE_RGB565 (1 << 0)
#define MAX9286_DATATYPE_RGB888 (0 << 0)
/* Register 0x15 */
+#define MAX9286_CSI_IMAGE_TYP BIT(7)
#define MAX9286_VC(n) ((n) << 5)
#define MAX9286_VCTYPE BIT(4)
#define MAX9286_CSIOUTEN BIT(3)
-#define MAX9286_0X15_RESV (3 << 0)
+#define MAX9286_SWP_ENDIAN BIT(2)
+#define MAX9286_EN_CCBSYB_CLK_STR BIT(1)
+#define MAX9286_EN_GPI_CCBSYB BIT(0)
/* Register 0x1b */
#define MAX9286_SWITCHIN(n) (1 << ((n) + 4))
#define MAX9286_ENEQ(n) (1 << (n))
@@ -525,10 +528,12 @@ static void max9286_set_video_format(struct max9286_priv *priv,
return;
/*
- * Video format setup:
- * Disable CSI output, VC is set according to Link number.
+ * Video format setup: disable CSI output, set VC according to Link
+ * number, enable I2C clock stretching when CCBSY is low, enable CCBSY
+ * in external GPI-to-GPO mode.
*/
- max9286_write(priv, 0x15, MAX9286_VCTYPE | MAX9286_0X15_RESV);
+ max9286_write(priv, 0x15, MAX9286_VCTYPE | MAX9286_EN_CCBSYB_CLK_STR |
+ MAX9286_EN_GPI_CCBSYB);
/* Enable CSI-2 Lane D0-D3 only, DBL mode. */
max9286_write(priv, 0x12, MAX9286_CSIDBL | MAX9286_DBL |
@@ -810,13 +815,17 @@ static int max9286_s_stream(struct v4l2_subdev *sd, int enable)
}
/*
- * Enable CSI output, VC set according to link number.
- * Bit 7 must be set (chip manual says it's 0 and reserved).
+ * Configure the CSI-2 output to line interleaved mode (W x (N
+ * x H), as opposed to the (N x W) x H mode that outputs the
+ * images stitched side-by-side) and enable it.
*/
- max9286_write(priv, 0x15, 0x80 | MAX9286_VCTYPE |
- MAX9286_CSIOUTEN | MAX9286_0X15_RESV);
+ max9286_write(priv, 0x15, MAX9286_CSI_IMAGE_TYP | MAX9286_VCTYPE |
+ MAX9286_CSIOUTEN | MAX9286_EN_CCBSYB_CLK_STR |
+ MAX9286_EN_GPI_CCBSYB);
} else {
- max9286_write(priv, 0x15, MAX9286_VCTYPE | MAX9286_0X15_RESV);
+ max9286_write(priv, 0x15, MAX9286_VCTYPE |
+ MAX9286_EN_CCBSYB_CLK_STR |
+ MAX9286_EN_GPI_CCBSYB);
/* Stop all cameras. */
for_each_source(priv, source)
--
Regards,
Laurent Pinchart
