[PATCH 11/13] media: s5p-g2d: Use platform_get_irq() to get the interrupt

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
 drivers/media/platform/s5p-g2d/g2d.c | 10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

diff --git a/drivers/media/platform/s5p-g2d/g2d.c b/drivers/media/platform/s5p-g2d/g2d.c
index fa0bb31bd2b9..dd8864779a7c 100644
--- a/drivers/media/platform/s5p-g2d/g2d.c
+++ b/drivers/media/platform/s5p-g2d/g2d.c
@@ -623,7 +623,6 @@ static int g2d_probe(struct platform_device *pdev)
 {
 	struct g2d_dev *dev;
 	struct video_device *vfd;
-	struct resource *res;
 	const struct of_device_id *of_id;
 	int ret = 0;
 
@@ -664,14 +663,11 @@ static int g2d_probe(struct platform_device *pdev)
 		goto put_clk_gate;
 	}
 
-	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "failed to find IRQ\n");
-		ret = -ENXIO;
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0)
 		goto unprep_clk_gate;
-	}
 
-	dev->irq = res->start;
+	dev->irq = ret;
 
 	ret = devm_request_irq(&pdev->dev, dev->irq, g2d_isr,
 						0, pdev->name, dev);
-- 
2.17.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux