Implement the get_frame_desc pad operation to allow retrieving the
stream configuration of the max9286 subdevice.
Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
---
drivers/media/i2c/max9286.c | 53 +++++++++++++++++++++++++++++++++++++
1 file changed, 53 insertions(+)
diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c
index aa7cb7c10fc0..78988f2bdf91 100644
--- a/drivers/media/i2c/max9286.c
+++ b/drivers/media/i2c/max9286.c
@@ -876,6 +876,58 @@ static int max9286_set_fmt(struct v4l2_subdev *sd,
return ret;
}
+static int max9286_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad,
+ struct v4l2_mbus_frame_desc *fd)
+{
+ struct v4l2_subdev_route *route;
+ struct v4l2_subdev_state *state;
+ int ret = 0;
+
+ if (pad != MAX9286_SRC_PAD)
+ return -EINVAL;
+
+ state = v4l2_subdev_lock_active_state(sd);
+
+ memset(fd, 0, sizeof(*fd));
+
+ /* One stream entry per each connected route. */
+ for_each_active_route(&state->routing, route) {
+ struct v4l2_mbus_frame_desc_entry *entry =
+ &fd->entry[fd->num_entries];
+ struct v4l2_mbus_framefmt *fmt;
+
+ fmt = v4l2_state_get_stream_format(state, pad,
+ route->source_stream);
+ if (!fmt) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /*
+ * Assume a YUYV format (0x1e DT) and 16 bpp: we only support
+ * these formats at the moment.
+ */
+ entry->stream = fd->num_entries++;
+ entry->flags = V4L2_MBUS_FRAME_DESC_FL_LEN_MAX;
+ entry->length = fmt->width * fmt->height * 16 / 8;
+ entry->pixelcode = fmt->code;
+
+ /*
+ * The source stream id corresponds to the virtual channel a
+ * stream is output on.
+ */
+ entry->bus.csi2.vc = route->source_stream;
+ entry->bus.csi2.dt = 0x1e;
+ }
+
+ fd->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2;
+
+out:
+ v4l2_subdev_unlock_state(state);
+
+ return ret;
+}
+
static int max9286_routing_validate(struct max9286_priv *priv,
struct v4l2_subdev_krouting *routing)
{
@@ -1025,6 +1077,7 @@ static const struct v4l2_subdev_pad_ops max9286_pad_ops = {
.enum_mbus_code = max9286_enum_mbus_code,
.get_fmt = v4l2_subdev_get_fmt,
.set_fmt = max9286_set_fmt,
+ .get_frame_desc = max9286_get_frame_desc,
.set_routing = max9286_set_routing,
};
--
2.33.1
