Re: [PATCH 2/3] drm: rcar-du: DRM_RCAR_USE_LVDS should depend on DRM_RCAR_DU

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Geert,

On Wed, Dec 15, 2021 at 11:17:37AM +0100, Geert Uytterhoeven wrote:
> On Wed, Dec 15, 2021 at 11:12 AM Laurent Pinchart wrote:
> > On Wed, Dec 15, 2021 at 10:27:46AM +0100, Geert Uytterhoeven wrote:
> > > The Renesas R-Car LVDS encoder driver is a subdriver of the R-Car
> > > Display Unit driver, and enabling DRM_RCAR_USE_LVDS while DRM_RCAR_DU is
> > > disabled doesn't have any impact on the kernel built.  Hence add a
> > > dependency on DRM_RCAR_DU, to prevent asking the user about this driver
> > > when configuring a kernel without R-Car Display Unit support, like is
> > > already done for DRM_RCAR_CMM.
> > >
> > > Fixes: 42d95d1b3a9c649b ("drm/rcar: stop using 'imply' for dependencies")
> > > Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> > > ---
> > > The problem pre-existed before commit 42d95d1b3a9c649b, as the
> > > dependency of DRM_RCAR_LVDS on DRM_RCAR_DU was accidentally removed
> > > before.
> > > Fixes: c6a27fa41fabb35f ("drm: rcar-du: Convert LVDS encoder code to bridge driver")
> > > ---
> > >  drivers/gpu/drm/rcar-du/Kconfig | 2 +-
> > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/gpu/drm/rcar-du/Kconfig b/drivers/gpu/drm/rcar-du/Kconfig
> > > index 65d72be50f46f19e..a7aa556e301d1087 100644
> > > --- a/drivers/gpu/drm/rcar-du/Kconfig
> > > +++ b/drivers/gpu/drm/rcar-du/Kconfig
> > > @@ -32,7 +32,7 @@ config DRM_RCAR_DW_HDMI
> > >
> > >  config DRM_RCAR_USE_LVDS
> > >       bool "R-Car DU LVDS Encoder Support"
> > > -     depends on DRM_BRIDGE && OF
> > > +     depends on DRM_BRIDGE && OF && DRM_RCAR_DU
> >
> > Shouldn't the same be done for DRM_RCAR_DW_HDMI ? Even better, we could
> 
> DRM_RCAR_DW_HDMI can be enabled and built with CONFIG_COMPILE_TEST=y
> and CONFIG_DRM_RCAR_DU=n (yes I've tried on RISC-V ;-)

It would seem so indeed, my question is whether that shouldn't be fixed
as well.

> > wrap all the entries for the subdrivers in a 'if DRM_RCAR_DU'.
> 
> That might work.  It can be tricky with bool/tristate, as sometimes m
> is not properly propagated.

Would you give it a try for a v2 ?

> > >       default DRM_RCAR_DU
> > >       help
> > >         Enable support for the R-Car Display Unit embedded LVDS encoders.

-- 
Regards,

Laurent Pinchart



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux