Re: [PATCH v2 0/2] Initial Renesas R-Car remoteproc support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Good morning,

On Tue, Nov 30, 2021 at 11:00:47AM +0100, Julien Massot wrote:
> Most of the SoCs in the R-Car gen3 SoC series such as
> H3,M3 and E3 have an 'Arm Realtime Core'.
> This Realtime core is an Arm Cortex-R7 clocked at 800MHz.
> This series adds initial support to load a firmware and start
> this remote processor through the remoteproc subsystem.
> 
> This series depends on
> https://patchwork.kernel.org/project/linux-renesas-soc/patch/20211022122101.66998-1-julien.massot@xxxxxxx/
> to be able to set the Cortex-R7 boot address.

The above depencency is needed for this patchset to compile properly.  Since
Geert has already applied it to his renesas-devel tree we can do two things:

1) Make this set go through Geert's tree.
2) Geert publishes an immutable branch I can pull the dependency from.

I'm good either way, just let me know what you want to do.

Thanks,
Mathieu

> 
> One of the way to test this driver is to use the zephyr upstream support
> for h3ulcb board 'blinky' demo is my favorite testing firmware.
> 
> To generate a firmware with the zephyr project.
> 
> follow this starting guide
> https://docs.zephyrproject.org/2.7.0/getting_started/index.html
> 
> Then compile your zephyr demo
> west build -b rcar_h3ulcb_cr7 zephyr/samples/basic/blinky \
>     -DCONFIG_KERNEL_ENTRY=\"_vector_table\" \
>     --build-dir h3-blinky
> 
> Then you can use h3-blinky/zephyr/zephyr.elf as a testing
> firmware.
> 
> Patch 1/2 adds the dt-bindings
> 
> Patch 2/2 is a small driver to cover basic remoteproc
> usage: loading firmware from filesystem, starting and stopping the
> Cortex-r7 processor.
> 
> Device tree modifications have been dropped in this patchset version.
> Reason is that memory range used by the Cortex-R7 depends on
> design choice.
> One thing we could do in the future is to add CR7 node
> in the different Gen3 SoCs dtsi files such as r8a77951.dtsi, r8a77990.dtsi,
> r8a77961.dtsi.. 
> 
> Julien Massot (2):
>   dt-bindings: remoteproc: Add Renesas R-Car
>   remoteproc: Add Renesas rcar driver
> 
>  .../remoteproc/renesas,rcar-rproc.yaml        |  65 +++++
>  drivers/remoteproc/Kconfig                    |  11 +
>  drivers/remoteproc/Makefile                   |   1 +
>  drivers/remoteproc/rcar_rproc.c               | 226 ++++++++++++++++++
>  4 files changed, 303 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/renesas,rcar-rproc.yaml
>  create mode 100644 drivers/remoteproc/rcar_rproc.c
> 
> -- 
> 2.33.1
> 
> 



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux