[PATCH v4 0/4] arm64: dts: renesas: r8a779a0 DU support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Provide the DT nodes for the DU, and DSI found on the r8a779a0, and
extend the falcon-cpu board add on with the TI SN65DSI86 bridge which is
used to connect the DSI output to the mini display-port connector on the
Falcon CPU board.

This has been successfully tested on a Falcon-V3U with patches to the
rcar_du and sn65dsi86 which will be sent separately.

Patch 4 could be expected to be merged with patch 2, but I have kept it
separate for specific review. It can stay separate or be squashed if the
change itself is approved.

Kieran Bingham (4):
  arm64: dts: renesas: r8a779a0: Add DU support
  arm64: dts: renesas: r8a779a0: Add DSI encoders
  arm64: dts: renesas: r8a779a0: falcon-cpu: Add DSI display output
  arm64: dts: renesas: r8a779a0: Provide default DSI data-lanes

 .../boot/dts/renesas/r8a779a0-falcon-cpu.dtsi | 79 +++++++++++++++
 arch/arm64/boot/dts/renesas/r8a779a0.dtsi     | 99 +++++++++++++++++++
 2 files changed, 178 insertions(+)

-- 
2.30.2




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux