Hi Geert,
Thank you for the review.
On Tue, Nov 23, 2021 at 2:44 PM Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
>
> Hi Prabhakar,
>
> On Mon, Nov 22, 2021 at 12:58 AM Lad Prabhakar
> <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> wrote:
> > This patch adds missing power-supply and enable-gpios property to
> > backlight node. This fixes the warning "pwm-backlight backlight:
> > backlight supply power not found, using dummy regulator".
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
>
> Thanks for your patch!
>
> > --- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi
> > +++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi
> > @@ -12,6 +12,17 @@
> >
> > brightness-levels = <0 2 8 16 32 64 128 255>;
> > default-brightness-level = <6>;
> > + power-supply = <®_12v>;
> > + enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
>
> According to the schematics (up to Rev. 4.00), GP6_07 is not connected?
>
Ouch sorry about that. When I noticed a warning with the regulator, I
saw the missing gpio property too and I pulled out the older schematic
with Rev2 which has GP6_07 :(
> > + };
> > +
> > + reg_12v: regulator2 {
>
> Using "regulatorN" as a node name is error-prone, and may lead to
> accidental clashes. Please use a more appropriate name.
>
> > + compatible = "regulator-fixed";
> > + regulator-name = "fixed-12V";
> > + regulator-min-microvolt = <12000000>;
> > + regulator-max-microvolt = <12000000>;
>
> Hmm, the AT1316A is a constant-current source, not a constant-voltage
> source? The -02 variant has a 0.2V Low Reference Voltage. Combined
> with the 1.1Ω resistor, that should give 181818 microamp.
>
Agreed.
Cheers,
Prabhakar
> > + regulator-boot-on;
> > + regulator-always-on;
> > };
> > };
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
