Add Thermal Sensor Unit(TSU) driver for RZ/G2L SoC.
Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
v1->v2:
* Removed devm_add_action_or_reset from probe.
---
drivers/thermal/Kconfig | 9 ++
drivers/thermal/Makefile | 1 +
drivers/thermal/rzg2l_thermal.c | 235 ++++++++++++++++++++++++++++++++
3 files changed, 245 insertions(+)
create mode 100644 drivers/thermal/rzg2l_thermal.c
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index d7f44deab5b1..e37691e0bf20 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -354,6 +354,15 @@ config RCAR_GEN3_THERMAL
Enable this to plug the R-Car Gen3 or RZ/G2 thermal sensor driver into
the Linux thermal framework.
+config RZG2L_THERMAL
+ tristate "Renesas RZ/G2L thermal driver"
+ depends on ARCH_RENESAS || COMPILE_TEST
+ depends on HAS_IOMEM
+ depends on OF
+ help
+ Enable this to plug the RZ/G2L thermal sensor driver into the Linux
+ thermal framework.
+
config KIRKWOOD_THERMAL
tristate "Temperature sensor on Marvell Kirkwood SoCs"
depends on MACH_KIRKWOOD || COMPILE_TEST
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 82fc3e616e54..f0c36a1530d5 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -37,6 +37,7 @@ obj-$(CONFIG_SUN8I_THERMAL) += sun8i_thermal.o
obj-$(CONFIG_ROCKCHIP_THERMAL) += rockchip_thermal.o
obj-$(CONFIG_RCAR_THERMAL) += rcar_thermal.o
obj-$(CONFIG_RCAR_GEN3_THERMAL) += rcar_gen3_thermal.o
+obj-$(CONFIG_RZG2L_THERMAL) += rzg2l_thermal.o
obj-$(CONFIG_KIRKWOOD_THERMAL) += kirkwood_thermal.o
obj-y += samsung/
obj-$(CONFIG_DOVE_THERMAL) += dove_thermal.o
diff --git a/drivers/thermal/rzg2l_thermal.c b/drivers/thermal/rzg2l_thermal.c
new file mode 100644
index 000000000000..ea828c15dd1e
--- /dev/null
+++ b/drivers/thermal/rzg2l_thermal.c
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RZ/G2L TSU Thermal Sensor Driver
+ *
+ * Copyright (C) 2021 Renesas Electronics Corporation
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <linux/thermal.h>
+
+#include "thermal_hwmon.h"
+
+#define CTEMP_MASK 0xFFF
+
+/* default calibration values, if FUSE values are missing */
+#define SW_CALIB0_VAL 3148
+#define SW_CALIB1_VAL 503
+
+/* Register offsets */
+#define TSU_SM 0x00
+#define TSU_ST 0x04
+#define TSU_SAD 0x0C
+#define TSU_SS 0x10
+
+#define OTPTSUTRIM_REG(n) (0x18 + ((n) * 0x4))
+
+/* Sensor Mode Register(TSU_SM) */
+#define TSU_SM_EN_TS BIT(0)
+#define TSU_SM_ADC_EN_TS BIT(1)
+#define TSU_SM_NORMAL_MODE (TSU_SM_EN_TS | TSU_SM_ADC_EN_TS)
+
+/* TSU_ST bits */
+#define TSU_ST_START BIT(0)
+
+#define TSU_SS_CONV_RUNNING BIT(0)
+
+#define TS_CODE_AVE_SCALE(x) ((x) * 1000000)
+#define MCELSIUS(temp) ((temp) * 1000)
+#define TS_CODE_CAP_TIMES 8 /* Capture times */
+#define RZG2L_THERMAL_GRAN 500 /* milli Celsius */
+
+#define RZG2L_TSU_SS_TIMEOUT_US 1000
+
+struct rzg2l_thermal_priv {
+ struct device *dev;
+ void __iomem *base;
+ struct thermal_zone_device *zone;
+ struct reset_control *rstc;
+ u32 calib0, calib1;
+};
+
+static inline u32 rzg2l_thermal_read(struct rzg2l_thermal_priv *priv, u32 reg)
+{
+ return ioread32(priv->base + reg);
+}
+
+static inline void rzg2l_thermal_write(struct rzg2l_thermal_priv *priv, u32 reg,
+ u32 data)
+{
+ iowrite32(data, priv->base + reg);
+}
+
+static int rzg2l_thermal_round(int temp)
+{
+ int result, round_offs;
+
+ round_offs = temp >= 0 ? RZG2L_THERMAL_GRAN / 2 : -RZG2L_THERMAL_GRAN / 2;
+ result = (temp + round_offs) / RZG2L_THERMAL_GRAN;
+
+ return result * RZG2L_THERMAL_GRAN;
+}
+
+static int rzg2l_thermal_get_temp(void *devdata, int *temp)
+{
+ struct rzg2l_thermal_priv *priv = devdata;
+ u32 result, dsensor, ts_code_ave;
+ int val, i;
+
+ result = 0;
+ /* Read the ADC value 8 times with an interval of 20 microsecs */
+ for (i = 0; i < TS_CODE_CAP_TIMES ; i++) {
+ result += rzg2l_thermal_read(priv, TSU_SAD) & CTEMP_MASK;
+ usleep_range(20, 30);
+ }
+
+ /* Calculate the average value */
+ ts_code_ave = result / TS_CODE_CAP_TIMES;
+
+ /* Curvature correction */
+ dsensor = TS_CODE_AVE_SCALE(ts_code_ave) /
+ (TS_CODE_AVE_SCALE(1) + (ts_code_ave * 13));
+
+ /* Temperature calculation */
+ val = ((dsensor - priv->calib1) * (MCELSIUS(165) /
+ (priv->calib0 - priv->calib1))) - MCELSIUS(40);
+
+ /* Round value to device granularity setting */
+ *temp = rzg2l_thermal_round(val);
+
+ return 0;
+}
+
+static const struct thermal_zone_of_device_ops rzg2l_tz_of_ops = {
+ .get_temp = rzg2l_thermal_get_temp,
+};
+
+static int rzg2l_thermal_init(struct rzg2l_thermal_priv *priv)
+{
+ u32 reg_val;
+
+ rzg2l_thermal_write(priv, TSU_SM, TSU_SM_NORMAL_MODE);
+ rzg2l_thermal_write(priv, TSU_ST, 0);
+
+ /* Before setting START bit, Wait for 60 µs */
+ usleep_range(60, 80);
+
+ reg_val = rzg2l_thermal_read(priv, TSU_ST);
+ reg_val |= TSU_ST_START;
+ rzg2l_thermal_write(priv, TSU_ST, reg_val);
+
+ return readl_poll_timeout(priv->base + TSU_SS, reg_val,
+ reg_val == TSU_SS_CONV_RUNNING, 50,
+ RZG2L_TSU_SS_TIMEOUT_US);
+}
+
+static void rzg2l_thermal_reset_assert_pm_disable_put(struct platform_device *pdev)
+{
+ struct rzg2l_thermal_priv *priv = dev_get_drvdata(&pdev->dev);
+
+ pm_runtime_put(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ reset_control_assert(priv->rstc);
+}
+
+static int rzg2l_thermal_remove(struct platform_device *pdev)
+{
+ struct rzg2l_thermal_priv *priv = dev_get_drvdata(&pdev->dev);
+
+ thermal_remove_hwmon_sysfs(priv->zone);
+ rzg2l_thermal_reset_assert_pm_disable_put(pdev);
+
+ return 0;
+}
+
+static int rzg2l_thermal_probe(struct platform_device *pdev)
+{
+ struct thermal_zone_device *zone;
+ struct rzg2l_thermal_priv *priv;
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ priv->dev = dev;
+ priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+ if (IS_ERR(priv->rstc))
+ return dev_err_probe(dev, PTR_ERR(priv->rstc),
+ "failed to get cpg reset");
+
+ reset_control_deassert(priv->rstc);
+
+ pm_runtime_enable(dev);
+ pm_runtime_get_sync(dev);
+
+ priv->calib0 = rzg2l_thermal_read(priv, OTPTSUTRIM_REG(0));
+ if (!priv->calib0)
+ priv->calib0 = SW_CALIB0_VAL;
+
+ priv->calib1 = rzg2l_thermal_read(priv, OTPTSUTRIM_REG(1));
+ if (!priv->calib1)
+ priv->calib1 = SW_CALIB1_VAL;
+
+ platform_set_drvdata(pdev, priv);
+ ret = rzg2l_thermal_init(priv);
+ if (ret) {
+ dev_err(dev, "Failed to start TSU");
+ goto err;
+ }
+
+ zone = devm_thermal_zone_of_sensor_register(dev, 0, priv,
+ &rzg2l_tz_of_ops);
+ if (IS_ERR(zone)) {
+ dev_err(dev, "Can't register thermal zone");
+ ret = PTR_ERR(zone);
+ goto err;
+ }
+
+ priv->zone = zone;
+ priv->zone->tzp->no_hwmon = false;
+ ret = thermal_add_hwmon_sysfs(priv->zone);
+ if (ret)
+ goto err;
+
+ dev_info(dev, "TSU probed with %s caliberation values",
+ rzg2l_thermal_read(priv, OTPTSUTRIM_REG(0)) ? "hw" : "sw");
+
+ return 0;
+
+err:
+ rzg2l_thermal_reset_assert_pm_disable_put(pdev);
+ return ret;
+}
+
+static const struct of_device_id rzg2l_thermal_dt_ids[] = {
+ { .compatible = "renesas,rzg2l-tsu", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rzg2l_thermal_dt_ids);
+
+static struct platform_driver rzg2l_thermal_driver = {
+ .driver = {
+ .name = "rzg2l_thermal",
+ .of_match_table = rzg2l_thermal_dt_ids,
+ },
+ .probe = rzg2l_thermal_probe,
+ .remove = rzg2l_thermal_remove,
+};
+module_platform_driver(rzg2l_thermal_driver);
+
+MODULE_DESCRIPTION("Renesas RZ/G2L TSU Thermal Sensor Driver");
+MODULE_AUTHOR("Biju Das <biju.das.jz@xxxxxxxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
--
2.17.1
