RE: [PATCH v1 3/3] watchdog: Add Watchdog Timer driver for RZ/G2L

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi All,

> Subject: [PATCH v1 3/3] watchdog: Add Watchdog Timer driver for RZ/G2L
> 
> Add Watchdog Timer driver for RZ/G2L SoC.
> 
> WDT IP block supports normal watchdog timer function and reset request
> function due to CPU parity error.
> 
> This driver currently supports normal watchdog timer function and later
> will add support for reset request function due to CPU parity error.
> 
> Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> ---
> RFC->V1
>  * Removed pclk_rate from priv.
>  * rzg2l_wdt_write() returns void and Removed tiemout related to register
> update
>  * rzg2l_wdt_init_timeout() returns void and removed delays.
>  * removed set_bit(WDOG_HW_RUNNING,..) as we can stop watchdog
>  * renamed reset_assert_clock_disable->reset_assert_pm_disable_put
>  * started using devm_reset_control_get_exclusive()
>  * removed platform_set_drvdata(pdev, priv) as there is no user
>  * removed watchdog_set_restart_priority(&priv->wdev, 0) as 0 is the
> default.
>  * removed remove callback as it is empty.
> ---
>  drivers/watchdog/Kconfig     |   8 ++
>  drivers/watchdog/Makefile    |   1 +
>  drivers/watchdog/rzg2l_wdt.c | 262 +++++++++++++++++++++++++++++++++++
>  3 files changed, 271 insertions(+)
>  create mode 100644 drivers/watchdog/rzg2l_wdt.c
> 
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index
> bf59faeb3de1..34da309a7afd 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -895,6 +895,14 @@ config RENESAS_RZAWDT
>  	  This driver adds watchdog support for the integrated watchdogs in
> the
>  	  Renesas RZ/A SoCs. These watchdogs can be used to reset a system.
> 
> +config RENESAS_RZG2LWDT
> +	tristate "Renesas RZ/G2L WDT Watchdog"
> +	depends on ARCH_RENESAS || COMPILE_TEST
> +	select WATCHDOG_CORE
> +	help
> +	  This driver adds watchdog support for the integrated watchdogs in
> the
> +	  Renesas RZ/G2L SoCs. These watchdogs can be used to reset a
> system.
> +
>  config ASPEED_WATCHDOG
>  	tristate "Aspeed BMC watchdog support"
>  	depends on ARCH_ASPEED || COMPILE_TEST diff --git
> a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index
> 1bd2d6f37c53..e7e8ce546814 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -85,6 +85,7 @@ obj-$(CONFIG_LPC18XX_WATCHDOG) += lpc18xx_wdt.o
>  obj-$(CONFIG_BCM7038_WDT) += bcm7038_wdt.o
>  obj-$(CONFIG_RENESAS_WDT) += renesas_wdt.o
>  obj-$(CONFIG_RENESAS_RZAWDT) += rza_wdt.o
> +obj-$(CONFIG_RENESAS_RZG2LWDT) += rzg2l_wdt.o
>  obj-$(CONFIG_ASPEED_WATCHDOG) += aspeed_wdt.o
>  obj-$(CONFIG_STM32_WATCHDOG) += stm32_iwdg.o
>  obj-$(CONFIG_UNIPHIER_WATCHDOG) += uniphier_wdt.o diff --git
> a/drivers/watchdog/rzg2l_wdt.c b/drivers/watchdog/rzg2l_wdt.c new file
> mode 100644 index 000000000000..75102310796d
> --- /dev/null
> +++ b/drivers/watchdog/rzg2l_wdt.c
> @@ -0,0 +1,262 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Renesas RZ/G2L WDT Watchdog Driver
> + *
> + * Copyright (C) 2021 Renesas Electronics Corporation  */ #include
> +<linux/bitops.h> #include <linux/clk.h> #include <linux/delay.h>
> +#include <linux/io.h> #include <linux/kernel.h> #include
> +<linux/module.h> #include <linux/of.h> #include
> +<linux/platform_device.h> #include <linux/pm_runtime.h> #include
> +<linux/reset.h> #include <linux/watchdog.h>
> +
> +#define WDTCNT		0x00
> +#define WDTSET		0x04
> +#define WDTTIM		0x08
> +#define WDTINT		0x0C
> +#define WDTCNT_WDTEN	BIT(0)
> +#define WDTINT_INTDISP	BIT(0)
> +
> +#define WDT_DEFAULT_TIMEOUT		60U
> +
> +/* Setting period time register only 12 bit set in WDTSET[31:20] */
> +#define WDTSET_COUNTER_MASK		(0xFFF00000)
> +#define WDTSET_COUNTER_VAL(f)		((f) << 20)
> +
> +#define F2CYCLE_NSEC(f)			(1000000000 / (f))
> +#define WDT_CYCLE_MSEC(f, wdttime)	((1024 * 1024 * (((u64)wdttime) + 1))
> / \
> +					 ((f) / 1000000))
> +
> +static bool nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, bool,
> +0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started
> +(default="
> +				__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +
> +struct rzg2l_wdt_priv {
> +	void __iomem *base;
> +	struct watchdog_device wdev;
> +	struct reset_control *rstc;
> +	unsigned long osc_clk_rate;
> +	unsigned long delay;
> +};
> +
> +static void rzg2l_wdt_wait_delay(struct rzg2l_wdt_priv *priv) {
> +	/* delay timer when change the setting register */
> +	ndelay(priv->delay);
> +}
> +
> +static void rzg2l_wdt_write(struct rzg2l_wdt_priv *priv, u32 val,
> +unsigned int reg) {
> +	if (reg == WDTSET)
> +		val &= WDTSET_COUNTER_MASK;
> +
> +	writel_relaxed(val, priv->base + reg);
> +	/* Registers other than the WDTINT is always synchronized with
> WDT_CLK */
> +	if (reg != WDTINT)
> +		rzg2l_wdt_wait_delay(priv);
> +}
> +
> +static void rzg2l_wdt_init_timeout(struct watchdog_device *wdev) {
> +	struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
> +	u32 time_out;
> +
> +	/* Clear Lapsed Time Register and clear Interrupt */
> +	rzg2l_wdt_write(priv, WDTINT_INTDISP, WDTINT);
> +	/* 2 consecutive overflow cycle needed to trigger reset */
> +	time_out = (wdev->timeout / 2 * 1000000) / WDT_CYCLE_MSEC(priv-
> >osc_clk_rate, 0);
> +	rzg2l_wdt_write(priv, WDTSET_COUNTER_VAL(time_out), WDTSET); }
> +
> +static int rzg2l_wdt_start(struct watchdog_device *wdev) {
> +	struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
> +
> +	reset_control_deassert(priv->rstc);
> +	pm_runtime_get_sync(wdev->parent);
> +
> +	/* Initialize time out */
> +	rzg2l_wdt_init_timeout(wdev);
> +
> +	/* Initialize watchdog counter register */
> +	rzg2l_wdt_write(priv, 0, WDTTIM);
> +
> +	/* Enable watchdog timer*/
> +	rzg2l_wdt_write(priv, WDTCNT_WDTEN, WDTCNT);
> +
> +	return 0;
> +}
> +
> +static int rzg2l_wdt_stop(struct watchdog_device *wdev) {
> +	struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
> +
> +	pm_runtime_put(wdev->parent);
> +	reset_control_assert(priv->rstc);
> +
> +	return 0;
> +}
> +
> +static int rzg2l_wdt_restart(struct watchdog_device *wdev,
> +			     unsigned long action, void *data) {
> +	struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
> +
> +	/* Reset the module before we modify any register */
> +	reset_control_reset(priv->rstc);
> +	pm_runtime_get_sync(wdev->parent);
> +
> +	/* smallest counter value to reboot soon */
> +	rzg2l_wdt_write(priv, WDTSET_COUNTER_VAL(1), WDTSET);
> +
> +	/* Enable watchdog timer*/
> +	rzg2l_wdt_write(priv, WDTCNT_WDTEN, WDTCNT);
> +
> +	return 0;
> +}
> +
> +static const struct watchdog_info rzg2l_wdt_ident = {
> +	.options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING |
> WDIOF_SETTIMEOUT,
> +	.identity = "Renesas RZ/G2L WDT Watchdog", };
> +
> +static int rzg2l_wdt_ping(struct watchdog_device *wdev) {
> +	struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
> +
> +	rzg2l_wdt_write(priv, WDTINT_INTDISP, WDTINT);
> +
> +	return 0;
> +}
> +
> +static const struct watchdog_ops rzg2l_wdt_ops = {
> +	.owner = THIS_MODULE,
> +	.start = rzg2l_wdt_start,
> +	.stop = rzg2l_wdt_stop,
> +	.ping = rzg2l_wdt_ping,
> +	.restart = rzg2l_wdt_restart,
> +};
> +
> +static void rzg2l_wdt_reset_assert_pm_disable_put(void *data) {
> +	struct watchdog_device *wdev = data;
> +	struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
> +
> +	pm_runtime_put(wdev->parent);
> +	pm_runtime_disable(wdev->parent);
> +	reset_control_assert(priv->rstc);
> +}
> +
> +static int rzg2l_wdt_probe(struct platform_device *pdev) {
> +	struct device *dev = &pdev->dev;
> +	struct rzg2l_wdt_priv *priv;
> +	unsigned long pclk_rate;
> +	struct clk *wdt_clk;
> +	int ret;
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	priv->base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(priv->base))
> +		return PTR_ERR(priv->base);
> +
> +	/* Get watchdog main clock */
> +	wdt_clk = devm_clk_get(&pdev->dev, "oscclk");
> +	if (IS_ERR(wdt_clk))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(wdt_clk), "no
> oscclk");
> +
> +	priv->osc_clk_rate = clk_get_rate(wdt_clk);
> +	if (!priv->osc_clk_rate)
> +		return dev_err_probe(&pdev->dev, -EINVAL, "oscclk rate is 0");
> +
> +	devm_clk_put(&pdev->dev, wdt_clk);
> +
> +	/* Get Peripheral clock */
> +	wdt_clk = devm_clk_get(&pdev->dev, "pclk");
> +	if (IS_ERR(wdt_clk))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(wdt_clk), "no pclk");
> +
> +	pclk_rate = clk_get_rate(wdt_clk);
> +	if (!pclk_rate)
> +		return dev_err_probe(&pdev->dev, -EINVAL, "pclk rate is 0");
> +
> +	devm_clk_put(&pdev->dev, wdt_clk);
> +	priv->delay = F2CYCLE_NSEC(priv->osc_clk_rate) * 6 +
> +F2CYCLE_NSEC(pclk_rate) * 9;
> +
> +	priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
> +	if (IS_ERR(priv->rstc))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(priv->rstc),
> +				     "failed to get cpg reset");
> +
> +	reset_control_deassert(priv->rstc);
> +	pm_runtime_enable(&pdev->dev);
> +	ret = pm_runtime_resume_and_get(&pdev->dev);
> +	if (ret < 0) {
> +		dev_err(dev, "pm_runtime_resume_and_get failed ret=%pe",
> ERR_PTR(ret));
> +		goto out_pm_get;
> +	}
> +
> +	ret = devm_add_action_or_reset(&pdev->dev,
> +				       rzg2l_wdt_reset_assert_pm_disable_put,
> +				       &priv->wdev);
> +	if (ret < 0)
> +		goto out_reset;

Oops. I should call this after watchdog_set_drvdata().

> +	priv->wdev.info = &rzg2l_wdt_ident;
> +	priv->wdev.ops = &rzg2l_wdt_ops;
> +	priv->wdev.parent = dev;
> +	priv->wdev.min_timeout = 1;
> +	priv->wdev.max_timeout = WDT_CYCLE_MSEC(priv->osc_clk_rate, 0xfff);
> +	priv->wdev.timeout = WDT_DEFAULT_TIMEOUT;
> +
> +	watchdog_set_drvdata(&priv->wdev, priv);
> +	watchdog_set_nowayout(&priv->wdev, nowayout);
> +	watchdog_stop_on_unregister(&priv->wdev);
> +
> +	ret = watchdog_init_timeout(&priv->wdev, 0, dev);
> +	if (ret)
> +		dev_warn(dev, "Specified timeout invalid, using default");
> +
> +	ret = devm_watchdog_register_device(&pdev->dev, &priv->wdev);
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;
> +
> +out_reset:
> +	pm_runtime_put(dev);
> +out_pm_get:
> +	pm_runtime_disable(dev);
> +	reset_control_assert(priv->rstc);
> +
> +	return ret;
> +}
> +
> +static const struct of_device_id rzg2l_wdt_ids[] = {
> +	{ .compatible = "renesas,rzg2l-wdt", },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, rzg2l_wdt_ids);
> +
> +static struct platform_driver rzg2l_wdt_driver = {
> +	.driver = {
> +		.name = "rzg2l_wdt",
> +		.of_match_table = rzg2l_wdt_ids,
> +	},
> +	.probe = rzg2l_wdt_probe,
> +};
> +module_platform_driver(rzg2l_wdt_driver);
> +
> +MODULE_DESCRIPTION("Renesas RZ/G2L WDT Watchdog Driver");
> +MODULE_AUTHOR("Biju Das <biju.das.jz@xxxxxxxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
> --
> 2.17.1





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux