[PATCH v3 00/25] Unify PCI error response checking

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



An MMIO read from a PCI device that doesn't exist or doesn't respond
causes a PCI error.  There's no real data to return to satisfy the 
CPU read, so most hardware fabricates ~0 data.

This patch series adds PCI_ERROR_RESPONSE definition and other helper
definition SET_PCI_ERROR_RESPONSE and RESPONSE_IS_PCI_ERROR and uses it
where appropriate to make these checks consistent and easier to find.

This helps unify PCI error response checking and make error check
consistent and easier to find.

This series also ensures that the error response fabrication now happens
in the PCI_OP_READ and PCI_USER_READ_CONFIG. This removes the
responsibility from controller drivers to do the error response setting. 

Patch 1:
    - Adds the PCI_ERROR_RESPONSE and other related defintions
    - All other patches are dependent on this patch. This patch needs to
      be applied first, before the others

Patch 2:
    - Error fabrication happens in PCI_OP_READ and PCI_USER_READ_CONFIG
      whenever the data read via the controller driver fails.
    - This patch needs to be applied before, Patch 4/24 to Patch 15/24 are
      applied.

Patch 3:
    - Uses SET_PCI_ERROR_RESPONSE() when device is not found 

Patch 4 - 15:
    - Removes redundant error fabrication that happens in controller 
      drivers when the read from a PCI device fails.
    - These patches are dependent on Patch 2/24 of the series.
    - These can be applied in any order.

Patch 16 - 22:
    - Uses RESPONSE_IS_PCI_ERROR() to check the reads from hardware
    - Patches can be applied in any order.

Patch 23 - 25:
    - Edits the comments to include PCI_ERROR_RESPONSE alsong with
      0xFFFFFFFF, so that it becomes easier to grep for faulty 
      hardware reads.

Changelog
=========
v3:
   - Change RESPONSE_IS_PCI_ERROR macro definition
   - Fix the macros, Add () around macro parameters
   - Fix alignment issue in Patch 2/24
   - Add proper receipients for all the patches

v2:
    - Instead of using SET_PCI_ERROR_RESPONSE in all controller drivers
      to fabricate error response, only use them in PCI_OP_READ and
      PCI_USER_READ_CONFIG

Naveen Naidu (25):
  [Patch 1/25] PCI: Add PCI_ERROR_RESPONSE and it's related definitions
  [Patch 2/25] PCI: Set error response in config access defines when ops->read() fails
  [Patch 3/25] PCI: Use SET_PCI_ERROR_RESPONSE() when device not found
  [Patch 4/25] PCI: Remove redundant error fabrication when device read fails
  [Patch 5/25] PCI: thunder: Remove redundant error fabrication when device read fails
  [Patch 6/25] PCI: iproc: Remove redundant error fabrication when device read fails
  [Patch 7/25] PCI: mediatek: Remove redundant error fabrication when device read fails
  [Patch 8/25] PCI: exynos: Remove redundant error fabrication when device read fails
  [Patch 9/25] PCI: histb: Remove redundant error fabrication when device read fails
  [Patch 10/25] PCI: kirin: Remove redundant error fabrication when device read fails
  [Patch 11/25] PCI: aardvark: Remove redundant error fabrication when device read fails
  [Patch 12/25] PCI: mvebu: Remove redundant error fabrication when device read fails
  [Patch 13/25] PCI: altera: Remove redundant error fabrication when device read fails
  [Patch 14/25] PCI: rcar: Remove redundant error fabrication when device read fails
  [Patch 15/25] PCI: rockchip: Remove redundant error fabrication when device read fails
  [Patch 16/25] PCI/ERR: Use RESPONSE_IS_PCI_ERROR() to check read from hardware
  [Patch 17/25] PCI: vmd: Use RESPONSE_IS_PCI_ERROR() to check read from hardware
  [Patch 18/25] PCI: pciehp: Use RESPONSE_IS_PCI_ERROR() to check read from hardware
  [Patch 19/25] PCI/DPC: Use RESPONSE_IS_PCI_ERROR() to check read from hardware
  [Patch 20/25] PCI/PME: Use RESPONSE_IS_PCI_ERROR() to check read from hardware
  [Patch 21/25] PCI: cpqphp: Use RESPONSE_IS_PCI_ERROR() to check read from hardware
  [Patch 22/25] PCI: Use PCI_ERROR_RESPONSE to specify hardware error
  [Patch 23/25] PCI: keystone: Use PCI_ERROR_RESPONSE to specify hardware error
  [Patch 24/25] PCI: hv: Use PCI_ERROR_RESPONSE to specify hardware read error
  [Patch 25/25] PCI: xgene: Use PCI_ERROR_RESPONSE to specify hardware error

 drivers/pci/access.c                        | 32 +++++++-------
 drivers/pci/controller/dwc/pci-exynos.c     |  4 +-
 drivers/pci/controller/dwc/pci-keystone.c   |  4 +-
 drivers/pci/controller/dwc/pcie-histb.c     |  4 +-
 drivers/pci/controller/dwc/pcie-kirin.c     |  4 +-
 drivers/pci/controller/pci-aardvark.c       | 10 +----
 drivers/pci/controller/pci-hyperv.c         |  2 +-
 drivers/pci/controller/pci-mvebu.c          |  8 +---
 drivers/pci/controller/pci-thunder-ecam.c   | 46 +++++++--------------
 drivers/pci/controller/pci-thunder-pem.c    |  4 +-
 drivers/pci/controller/pci-xgene.c          |  8 ++--
 drivers/pci/controller/pcie-altera.c        |  4 +-
 drivers/pci/controller/pcie-iproc.c         |  4 +-
 drivers/pci/controller/pcie-mediatek.c      | 11 +----
 drivers/pci/controller/pcie-rcar-host.c     |  4 +-
 drivers/pci/controller/pcie-rockchip-host.c |  4 +-
 drivers/pci/controller/vmd.c                |  2 +-
 drivers/pci/hotplug/cpqphp_ctrl.c           |  4 +-
 drivers/pci/hotplug/pciehp_hpc.c            | 10 ++---
 drivers/pci/pci.c                           | 10 ++---
 drivers/pci/pcie/dpc.c                      |  4 +-
 drivers/pci/pcie/pme.c                      |  4 +-
 drivers/pci/probe.c                         | 10 ++---
 include/linux/pci.h                         |  9 ++++
 24 files changed, 85 insertions(+), 121 deletions(-)

-- 
2.25.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux