Re: [PATCH] arch: arm64: dts: Set gpio5-pin9 as input by default

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Meng Li (2021-10-19 10:00:20)
> The gpio5-pin9 is used as the interrupt pin of i2c external
> gpio chip, so set this pin as input by default.

Is a GPIO hog the right way to do this?
Shouldn't the other GPIO chip be modelled in DT and reference the gpio
interrupt line from there in its interrupt property?

I assume by 'external gpio chip' you mean one which is permanantly
attached to the ULCB Kingfisher board, and not a custom addition?

--
Regards
Kieran

> 
> Signed-off-by: Meng Li <Meng.Li@xxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/renesas/ulcb-kf.dtsi | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
> index 202177706cde..8986a7e6e099 100644
> --- a/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
> +++ b/arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
> @@ -205,6 +205,15 @@
>         };
>  };
>  
> +&gpio5 {
> +       gpio_exp_77_int {
> +               gpio-hog;
> +               gpios = <9 0>;
> +               input;
> +               line-name = "gpio-exp-77-int";
> +       };
> +};
> +
>  &i2c4 {
>         i2cswitch4: i2c-switch@71 {
>                 compatible = "nxp,pca9548";
> -- 
> 2.17.1
>




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux