The different port@ entries of the adv7482 nodes shall be encapsulated
in a ports node, add one. This change do not change how the driver
parses the DT and no driver change is needed.
The change however makes it possible to validate the source files with a
correct json-schema.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
---
.../arm64/boot/dts/renesas/r8a77990-ebisu.dts | 40 +++++++-------
.../boot/dts/renesas/salvator-common.dtsi | 54 ++++++++++---------
2 files changed, 49 insertions(+), 45 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
index 9c7146084ea1c779..b051e2f3aceb5a17 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
@@ -423,37 +423,39 @@ video-receiver@70 {
compatible = "adi,adv7482";
reg = <0x70>;
- #address-cells = <1>;
- #size-cells = <0>;
-
interrupt-parent = <&gpio0>;
interrupt-names = "intrq1", "intrq2";
interrupts = <7 IRQ_TYPE_LEVEL_LOW>,
<17 IRQ_TYPE_LEVEL_LOW>;
- port@7 {
- reg = <7>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- adv7482_ain7: endpoint {
- remote-endpoint = <&cvbs_con>;
+ port@7 {
+ reg = <7>;
+
+ adv7482_ain7: endpoint {
+ remote-endpoint = <&cvbs_con>;
+ };
};
- };
- port@8 {
- reg = <8>;
+ port@8 {
+ reg = <8>;
- adv7482_hdmi: endpoint {
- remote-endpoint = <&hdmi_in_con>;
+ adv7482_hdmi: endpoint {
+ remote-endpoint = <&hdmi_in_con>;
+ };
};
- };
- port@a {
- reg = <10>;
+ port@a {
+ reg = <10>;
- adv7482_txa: endpoint {
- clock-lanes = <0>;
- data-lanes = <1 2>;
- remote-endpoint = <&csi40_in>;
+ adv7482_txa: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ remote-endpoint = <&csi40_in>;
+ };
};
};
};
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index eb1f3b82300b1601..5a55ed7a7efac181 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
@@ -524,47 +524,49 @@ video-receiver@70 {
reg-names = "main", "dpll", "cp", "hdmi", "edid", "repeater",
"infoframe", "cbus", "cec", "sdp", "txa", "txb" ;
- #address-cells = <1>;
- #size-cells = <0>;
-
interrupt-parent = <&gpio6>;
interrupt-names = "intrq1", "intrq2";
interrupts = <30 IRQ_TYPE_LEVEL_LOW>,
<31 IRQ_TYPE_LEVEL_LOW>;
- port@7 {
- reg = <7>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- adv7482_ain7: endpoint {
- remote-endpoint = <&cvbs_con>;
+ port@7 {
+ reg = <7>;
+
+ adv7482_ain7: endpoint {
+ remote-endpoint = <&cvbs_con>;
+ };
};
- };
- port@8 {
- reg = <8>;
+ port@8 {
+ reg = <8>;
- adv7482_hdmi: endpoint {
- remote-endpoint = <&hdmi_in_con>;
+ adv7482_hdmi: endpoint {
+ remote-endpoint = <&hdmi_in_con>;
+ };
};
- };
- port@a {
- reg = <10>;
+ port@a {
+ reg = <10>;
- adv7482_txa: endpoint {
- clock-lanes = <0>;
- data-lanes = <1 2 3 4>;
- remote-endpoint = <&csi40_in>;
+ adv7482_txa: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1 2 3 4>;
+ remote-endpoint = <&csi40_in>;
+ };
};
- };
- port@b {
- reg = <11>;
+ port@b {
+ reg = <11>;
- adv7482_txb: endpoint {
- clock-lanes = <0>;
- data-lanes = <1>;
- remote-endpoint = <&csi20_in>;
+ adv7482_txb: endpoint {
+ clock-lanes = <0>;
+ data-lanes = <1>;
+ remote-endpoint = <&csi20_in>;
+ };
};
};
};
--
2.33.0
