[PATCH net-next v3 13/14] ravb: Update ravb_emac_init_gbeth()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch enables Receive/Transmit port of TOE and removes
the setting of promiscuous bit from EMAC configuration mode register.

This patch also update EMAC configuration mode comment from
"PAUSE prohibition" to "EMAC Mode: PAUSE prohibition; Duplex; TX;
RX; CRC Pass Through".

Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
---
v2->v3:
 * Enabled TPE/RPE of TOE, as disabling causes loopback test to fail
 * Documented CSR0 register bits
 * Removed PRM setting from EMAC configuration mode
 * Updated EMAC configuration mode.
v1->v2:
 * No change
V1:
 * New patch.
---
 drivers/net/ethernet/renesas/ravb.h      | 6 ++++++
 drivers/net/ethernet/renesas/ravb_main.c | 5 +++--
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/renesas/ravb.h b/drivers/net/ethernet/renesas/ravb.h
index 69a771526776..08062d73df10 100644
--- a/drivers/net/ethernet/renesas/ravb.h
+++ b/drivers/net/ethernet/renesas/ravb.h
@@ -204,6 +204,7 @@ enum ravb_reg {
 	TLFRCR	= 0x0758,
 	RFCR	= 0x0760,
 	MAFCR	= 0x0778,
+	CSR0    = 0x0800,	/* RZ/G2L only */
 };
 
 
@@ -964,6 +965,11 @@ enum CXR31_BIT {
 	CXR31_SEL_LINK1	= 0x00000008,
 };
 
+enum CSR0_BIT {
+	CSR0_TPE	= 0x00000010,
+	CSR0_RPE	= 0x00000020,
+};
+
 #define DBAT_ENTRY_NUM	22
 #define RX_QUEUE_OFFSET	4
 #define NUM_RX_QUEUE	2
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index 21fb83f209d5..f3f676e433d1 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -519,10 +519,10 @@ static void ravb_emac_init_gbeth(struct net_device *ndev)
 	/* Receive frame limit set register */
 	ravb_write(ndev, GBETH_RX_BUFF_MAX + ETH_FCS_LEN, RFLR);
 
-	/* PAUSE prohibition */
+	/* EMAC Mode: PAUSE prohibition; Duplex; TX; RX; CRC Pass Through */
 	ravb_write(ndev, ECMR_ZPF | ((priv->duplex > 0) ? ECMR_DM : 0) |
 			 ECMR_TE | ECMR_RE | ECMR_RCPT |
-			 ECMR_TXF | ECMR_RXF | ECMR_PRM, ECMR);
+			 ECMR_TXF | ECMR_RXF, ECMR);
 
 	ravb_set_rate_gbeth(ndev);
 
@@ -534,6 +534,7 @@ static void ravb_emac_init_gbeth(struct net_device *ndev)
 
 	/* E-MAC status register clear */
 	ravb_write(ndev, ECSR_ICD | ECSR_LCHNG | ECSR_PFRI, ECSR);
+	ravb_write(ndev, CSR0_TPE | CSR0_RPE, CSR0);
 
 	/* E-MAC interrupt enable register */
 	ravb_write(ndev, ECSIPR_ICDIP, ECSIPR);
-- 
2.17.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux