Hello Nikita and Vladimir,
Thanks for your work.
On 2021-09-24 12:02:45 +0300, Nikita Yushchenko wrote:
> From: Vladimir Barinov <vladimir.barinov@xxxxxxxxxxxxxxxxxx>
>
> Add missing initialization of num_channels field.
The num_channels field is intentionally left out here, and therefore
initialized to 0.
The reason for this is that tho even if the VCDT and VCDT2 register
exists on V3H the datasheet states that the value written to them should
always be 0. As the only usage of num_channels is to create the content
to write to these registers in rcsi2_start_receiver() setting it to 0
does the correct thing for V3H.
Nacked-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
>
> Fixes: 3ba37c2bcb0c ("media: rcar-csi2: add R8A77980 support")
> Signed-off-by: Vladimir Barinov <vladimir.barinov@xxxxxxxxxxxxxxxxxx>
> Signed-off-by: Nikita Yushchenko <nikita.yoush@xxxxxxxxxxxxxxxxxx>
> ---
> drivers/media/platform/rcar-vin/rcar-csi2.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
> index e28eff039688..f4d3c6dead30 100644
> --- a/drivers/media/platform/rcar-vin/rcar-csi2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
> @@ -1146,6 +1146,7 @@ static const struct rcar_csi2_info rcar_csi2_info_r8a77980 = {
> .init_phtw = rcsi2_init_phtw_h3_v3h_m3n,
> .hsfreqrange = hsfreqrange_h3_v3h_m3n,
> .csi0clkfreqrange = 0x20,
> + .num_channels = 4,
> .clear_ulps = true,
> };
>
> --
> 2.30.2
>
--
Regards,
Niklas Söderlund
