[PATCH 0/3] rcar-csi2: Improve link frequency selection

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

This series improves CSI-2 link frequency selection for the R-Car CSI-2 
driver. This series have been posted before in different forms but 
appears to have been side lined due to a confusion about a table in 
datasheets.

Since then a datasheet update have been issued and clarified the 
situation and I think the series is ready to be picked up.

The series have been rebased to Mauro's media-next tree and tested on 
R-Car M3N with out any regressions found.

Suresh Udipi (3):
  media: rcar-csi2: Correct the selection of hsfreqrange
  media: rcar-csi2: Add warning for PHY speed less than minimum
  media: rcar-csi2: Optimize the selection PHTW register

 drivers/media/platform/rcar-vin/rcar-csi2.c | 22 +++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

-- 
2.32.0




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux