This patch series aims to add USB2.0 Host and device support for RZ/G2L SoC.
v4->v5:
* Removed USBPHY control and binding patches as it is accepted for reset/next
* Removed USB ehci/ohci binding patches as it is accepted for usb/next.
* Updated Renesas USB2.0 PHY bindings to just use 'resets' as required.
* Added interrupts maxitems=1 for SoC other than RZ/G2L for Renesas USBHS bindings
* Updated the commit description for USB2.0 PHY driver patch.
v3->v4:
* Added Rob's Acked-by tag for generic-{ohci,ehci} binding patch
* Added Rob's Rb tag for RZ/G2L USBPHY control binding patch
* Incorporated Philipp's review comments for USBPHY control driver.
* Dropped second reset from usb2-phy binding patch
* Added maxitems as per Rob's review comment.
v2->v3
* USBPHY Control IP modelled as reset bindings as per Rob's suggestion
* Updated the binding patches
* Incorporated Geert's and Shimoda-San's review comment for phy driver patch.
v1->v2
* Updated usb phy control bindings with clock definitions
* Updated generic ohci/ehci bindings to support RZ/G2L SoC
* Incorporated vinod's review comment on usb phy control driver
* Add support for USB2.0 device and OTG support.
Biju Das (6):
arm64: configs: defconfig: Enable RZ/G2L USBPHY control driver
dt-bindings: phy: renesas,usb2-phy: Document RZ/G2L phy bindings
phy: renesas: phy-rcar-gen3-usb2: Add USB2.0 PHY support for RZ/G2L
arm64: dts: renesas: r9a07g044: Add USB2.0 phy and host support
dt-bindings: usb: renesas,usbhs: Document RZ/G2L bindings
arm64: dts: renesas: r9a07g044: Add USB2.0 device support
.../bindings/phy/renesas,usb2-phy.yaml | 15 +++
.../bindings/usb/renesas,usbhs.yaml | 26 +++-
arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 113 ++++++++++++++++++
arch/arm64/configs/defconfig | 1 +
drivers/phy/renesas/phy-rcar-gen3-usb2.c | 97 +++++++++++----
5 files changed, 226 insertions(+), 26 deletions(-)
--
2.17.1
