Add device tree binding documentation and header file for Renesas RZ/G2L pinctrl. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> Reviewed-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> --- .../pinctrl/renesas,rzg2l-pinctrl.yaml | 155 ++++++++++++++++++ include/dt-bindings/pinctrl/rzg2l-pinctrl.h | 23 +++ 2 files changed, 178 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml create mode 100644 include/dt-bindings/pinctrl/rzg2l-pinctrl.h diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml new file mode 100644 index 000000000000..ef68dabcf4dc --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -0,0 +1,155 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/renesas,rzg2l-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/G2L combined Pin and GPIO controller + +maintainers: + - Geert Uytterhoeven <geert+renesas@xxxxxxxxx> + - Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> + +description: + The Renesas SoCs of the RZ/G2L series feature a combined Pin and GPIO + controller. + Pin multiplexing and GPIO configuration is performed on a per-pin basis. + Each port features up to 8 pins, each of them configurable for GPIO function + (port mode) or in alternate function mode. + Up to 8 different alternate function modes exist for each single pin. + +properties: + compatible: + enum: + - renesas,r9a07g044-pinctrl # RZ/G2{L,LC} + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + description: + The first cell contains the global GPIO port index, constructed using the + RZG2L_GPIO() helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h> and the + second cell represents consumer flag as mentioned in ../gpio/gpio.txt + E.g. "RZG2L_GPIO(39, 1)" for P39_1. + + gpio-ranges: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + items: + - description: GPIO_RSTN signal + - description: GPIO_PORT_RESETN signal + - description: GPIO_SPARE_RESETN signal + +additionalProperties: + anyOf: + - type: object + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + description: + Pin controller client devices use pin configuration subnodes (children + and grandchildren) for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + phandle: true + pinmux: + description: + Values are constructed from GPIO port number, pin number, and + alternate function configuration number using the RZG2L_PORT_PINMUX() + helper macro in <dt-bindings/pinctrl/rzg2l-pinctrl.h>. + pins: true + drive-strength: + enum: [ 2, 4, 8, 12 ] + power-source: + enum: [ 1800, 2500, 3300 ] + slew-rate: true + gpio-hog: true + gpios: true + input-enable: true + output-high: true + output-low: true + line-name: true + + - type: object + properties: + phandle: true + + additionalProperties: + $ref: "#/additionalProperties/anyOf/0" + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio-ranges + - clocks + - power-domains + - resets + +examples: + - | + #include <dt-bindings/pinctrl/rzg2l-pinctrl.h> + #include <dt-bindings/clock/r9a07g044-cpg.h> + + pinctrl: pinctrl@11030000 { + compatible = "renesas,r9a07g044-pinctrl"; + reg = <0x11030000 0x10000>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 392>; + clocks = <&cpg CPG_MOD R9A07G044_GPIO_HCLK>; + resets = <&cpg R9A07G044_GPIO_RSTN>, + <&cpg R9A07G044_GPIO_PORT_RESETN>, + <&cpg R9A07G044_GPIO_SPARE_RESETN>; + power-domains = <&cpg>; + + scif0_pins: serial0 { + pinmux = <RZG2L_PORT_PINMUX(38, 0, 1)>, /* Tx */ + <RZG2L_PORT_PINMUX(38, 1, 1)>; /* Rx */ + }; + + i2c1_pins: i2c1 { + pins = "RIIC1_SDA", "RIIC1_SCL"; + input-enable; + }; + + sd1-pwr-en-hog { + gpio-hog; + gpios = <RZG2L_GPIO(39, 2) 0>; + output-high; + line-name = "sd1_pwr_en"; + }; + + sdhi1_pins: sd1 { + sd1_mux { + pinmux = <RZG2L_PORT_PINMUX(19, 0, 1)>, /* CD */ + <RZG2L_PORT_PINMUX(19, 1, 1)>; /* WP */ + power-source = <3300>; + }; + + sd1_data { + pins = "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3"; + power-source = <3300>; + }; + + sd1_ctrl { + pins = "SD1_CLK", "SD1_CMD"; + power-source = <3300>; + }; + }; + }; diff --git a/include/dt-bindings/pinctrl/rzg2l-pinctrl.h b/include/dt-bindings/pinctrl/rzg2l-pinctrl.h new file mode 100644 index 000000000000..b48f8c7a5556 --- /dev/null +++ b/include/dt-bindings/pinctrl/rzg2l-pinctrl.h @@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * This header provides constants for Renesas RZ/G2L family pinctrl bindings. + * + * Copyright (C) 2021 Renesas Electronics Corp. + * + */ + +#ifndef __DT_BINDINGS_RZG2L_PINCTRL_H +#define __DT_BINDINGS_RZG2L_PINCTRL_H + +#define RZG2L_PINS_PER_PORT 8 + +/* + * Create the pin index from its bank and position numbers and store in + * the upper 16 bits the alternate function identifier + */ +#define RZG2L_PORT_PINMUX(b, p, f) ((b) * RZG2L_PINS_PER_PORT + (p) | ((f) << 16)) + +/* Convert a port and pin label to its global pin index */ + #define RZG2L_GPIO(port, pin) ((port) * RZG2L_PINS_PER_PORT + (pin)) + +#endif /* __DT_BINDINGS_RZG2L_PINCTRL_H */ -- 2.17.1
