Re: [PATCH v2 1/5] dt-bindings: net: can: renesas,rcar-canfd: Document RZ/G2L SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Philipp,

Thank you for the review.

On Tue, Jul 20, 2021 at 11:22 AM Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> wrote:
>
> Hi Lad,
>
> On Mon, 2021-07-19 at 15:38 +0100, Lad Prabhakar wrote:
> > Add CANFD binding documentation for Renesas RZ/G2L SoC.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > Reviewed-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > ---
> >  .../bindings/net/can/renesas,rcar-canfd.yaml  | 66 +++++++++++++++++--
> >  1 file changed, 60 insertions(+), 6 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
> > index 0b33ba9ccb47..4fb6dd370904 100644
> > --- a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
> > +++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml
> > @@ -30,13 +30,15 @@ properties:
> >                - renesas,r8a77995-canfd     # R-Car D3
> >            - const: renesas,rcar-gen3-canfd # R-Car Gen3 and RZ/G2
> >
> > +      - items:
> > +          - enum:
> > +              - renesas,r9a07g044-canfd    # RZ/G2{L,LC}
> > +          - const: renesas,rzg2l-canfd     # RZ/G2L family
> > +
> >    reg:
> >      maxItems: 1
> >
> > -  interrupts:
> > -    items:
> > -      - description: Channel interrupt
> > -      - description: Global interrupt
> > +  interrupts: true
> >
> >    clocks:
> >      maxItems: 3
> > @@ -50,8 +52,7 @@ properties:
> >    power-domains:
> >      maxItems: 1
> >
> > -  resets:
> > -    maxItems: 1
> > +  resets: true
> >
> >    renesas,no-can-fd:
> >      $ref: /schemas/types.yaml#/definitions/flag
> > @@ -91,6 +92,59 @@ required:
> >    - channel0
> >    - channel1
> >
> > +if:
> > +  properties:
> > +    compatible:
> > +      contains:
> > +        enum:
> > +          - renesas,rzg2l-canfd
> > +then:
> > +  properties:
> > +    interrupts:
> > +      items:
> > +        - description: CAN global error interrupt
> > +        - description: CAN receive FIFO interrupt
> > +        - description: CAN0 error interrupt
> > +        - description: CAN0 transmit interrupt
> > +        - description: CAN0 transmit/receive FIFO receive completion interrupt
> > +        - description: CAN1 error interrupt
> > +        - description: CAN1 transmit interrupt
> > +        - description: CAN1 transmit/receive FIFO receive completion interrupt
> > +
> > +    interrupt-names:
> > +      items:
> > +        - const: g_error
> > +        - const: g_rx_fifo
> > +        - const: can0_error
> > +        - const: can0_tx
> > +        - const: can0_tx_rx_fifo_receive_completion
> > +        - const: can1_error
> > +        - const: can1_tx
> > +        - const: can1_tx_rx_fifo_receive_completion
> > +
> > +    resets:
> > +      items:
> > +        - description: CANFD_RSTP_N
> > +        - description: CANFD_RSTC_N
>
> Do you know what the "P" and "C" stands for? It would be nice if the
> description could tell us what the reset lines are used for.
>
unfortunately the HW manual does not mention  anything about "P" and "C" :(

> I would prefer if you used these names (or shortened versions, for
> example "rstp_n", "rstc_n") as "reset-names" and let the driver
> reference the resets by name instead of by index.
>
OK will do that and maxItems:2 for resets.

@Geert, for R-Car Gen3 does "canfd_rst" (as it's a module reset)
sounds good for reset-names? Or do you have any other suggestions?

Cheers,
Prabhakar



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux