On Mon, 19 Jul 2021 13:19:31 +0100, Biju Das wrote: > Add device tree binding document for RZ/G2L USBPHY Control Device. > It mainly controls reset and power down of the USB/PHY. > > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> > Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> > Reviewed-by: Rob Herring <robh@xxxxxxxxxx> > --- > v3->v4: > * Dropped reset reference. > * Added Rb-tag from Rob. > v3: > * New patch. > * Modelled USBPHY control from phy bindings to reset bindings, since the > IP mainly contols the reset of USB PHY. > --- > .../reset/renesas,rzg2l-usbphy-ctrl.yaml | 65 +++++++++++++++++++ > 1 file changed, 65 insertions(+) > create mode 100644 Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Error: Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.example.dts:25.30-31 syntax error FATAL ERROR: Unable to parse input tree make[1]: *** [scripts/Makefile.lib:380: Documentation/devicetree/bindings/reset/renesas,rzg2l-usbphy-ctrl.example.dt.yaml] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:1418: dt_binding_check] Error 2 \ndoc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1506961 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
