This patch adds OTG support for RZ/G2L SoC.
We need to use a different compatible string due to some differences
with R-Car Gen3 USB2.0 PHY. It uses line ctrl register for OTG_ID
pin changes and different OTG-BC interrupt bit for device recognition.
Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
v3->v4;
* using family compatible instead of SoC specific.
v3:
* Made seperate compatible for RZ/G2L.
* Extended rcar_gen3_phy_usb2_match_table[].data to support RZ/G2L.
---
drivers/phy/renesas/phy-rcar-gen3-usb2.c | 97 ++++++++++++++++++------
1 file changed, 73 insertions(+), 24 deletions(-)
diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index fbc55232120e..9de617ca9daa 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -64,6 +64,7 @@
/* VBCTRL */
#define USB2_VBCTRL_OCCLREN BIT(16)
#define USB2_VBCTRL_DRVVBUSSEL BIT(8)
+#define USB2_VBCTRL_VBOUT BIT(0)
/* LINECTRL1 */
#define USB2_LINECTRL1_DPRPD_EN BIT(19)
@@ -78,6 +79,10 @@
#define USB2_ADPCTRL_IDPULLUP BIT(5) /* 1 = ID sampling is enabled */
#define USB2_ADPCTRL_DRVVBUS BIT(4)
+/* RZ/G2L specific */
+#define USB2_OBINT_IDCHG_EN BIT(0)
+#define USB2_LINECTRL1_USB2_IDMON BIT(0)
+
#define NUM_OF_PHYS 4
enum rcar_gen3_phy_index {
PHY_INDEX_BOTH_HC,
@@ -112,9 +117,16 @@ struct rcar_gen3_chan {
struct mutex lock; /* protects rphys[...].powered */
enum usb_dr_mode dr_mode;
int irq;
+ u32 obint_enable_bits;
bool extcon_host;
bool is_otg_channel;
bool uses_otg_pins;
+ bool soc_no_adp_ctrl;
+};
+
+struct rcar_gen3_phy_drv_data {
+ const struct phy_ops *phy_usb2_ops;
+ bool no_adp_ctrl;
};
/*
@@ -172,14 +184,22 @@ static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int dm)
static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
{
void __iomem *usb2_base = ch->base;
- u32 val = readl(usb2_base + USB2_ADPCTRL);
+ u32 vbus_ctrl_reg = USB2_ADPCTRL;
+ u32 vbus_ctrl_val = USB2_ADPCTRL_DRVVBUS;
+ u32 val;
dev_vdbg(ch->dev, "%s: %08x, %d\n", __func__, val, vbus);
+ if (ch->soc_no_adp_ctrl) {
+ vbus_ctrl_reg = USB2_VBCTRL;
+ vbus_ctrl_val = USB2_VBCTRL_VBOUT;
+ }
+
+ val = readl(usb2_base + vbus_ctrl_reg);
if (vbus)
- val |= USB2_ADPCTRL_DRVVBUS;
+ val |= vbus_ctrl_val;
else
- val &= ~USB2_ADPCTRL_DRVVBUS;
- writel(val, usb2_base + USB2_ADPCTRL);
+ val &= ~vbus_ctrl_val;
+ writel(val, usb2_base + vbus_ctrl_reg);
}
static void rcar_gen3_control_otg_irq(struct rcar_gen3_chan *ch, int enable)
@@ -188,9 +208,9 @@ static void rcar_gen3_control_otg_irq(struct rcar_gen3_chan *ch, int enable)
u32 val = readl(usb2_base + USB2_OBINTEN);
if (ch->uses_otg_pins && enable)
- val |= USB2_OBINT_BITS;
+ val |= ch->obint_enable_bits;
else
- val &= ~USB2_OBINT_BITS;
+ val &= ~ch->obint_enable_bits;
writel(val, usb2_base + USB2_OBINTEN);
}
@@ -252,6 +272,9 @@ static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
if (!ch->uses_otg_pins)
return (ch->dr_mode == USB_DR_MODE_HOST) ? false : true;
+ if (ch->soc_no_adp_ctrl)
+ return !!(readl(ch->base + USB2_LINECTRL1) & USB2_LINECTRL1_USB2_IDMON);
+
return !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
}
@@ -376,16 +399,17 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
USB2_LINECTRL1_DMRPD_EN | USB2_LINECTRL1_DM_RPD;
writel(val, usb2_base + USB2_LINECTRL1);
- val = readl(usb2_base + USB2_VBCTRL);
- val &= ~USB2_VBCTRL_OCCLREN;
- writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL);
- val = readl(usb2_base + USB2_ADPCTRL);
- writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL);
-
+ if (!ch->soc_no_adp_ctrl) {
+ val = readl(usb2_base + USB2_VBCTRL);
+ val &= ~USB2_VBCTRL_OCCLREN;
+ writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL);
+ val = readl(usb2_base + USB2_ADPCTRL);
+ writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL);
+ }
msleep(20);
writel(0xffffffff, usb2_base + USB2_OBINTSTA);
- writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
+ writel(ch->obint_enable_bits, usb2_base + USB2_OBINTEN);
rcar_gen3_device_recognition(ch);
}
@@ -397,9 +421,9 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
u32 status = readl(usb2_base + USB2_OBINTSTA);
irqreturn_t ret = IRQ_NONE;
- if (status & USB2_OBINT_BITS) {
+ if (status & ch->obint_enable_bits) {
dev_vdbg(ch->dev, "%s: %08x\n", __func__, status);
- writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
+ writel(ch->obint_enable_bits, usb2_base + USB2_OBINTSTA);
rcar_gen3_device_recognition(ch);
ret = IRQ_HANDLED;
}
@@ -535,26 +559,45 @@ static const struct phy_ops rz_g1c_phy_usb2_ops = {
.owner = THIS_MODULE,
};
+static const struct rcar_gen3_phy_drv_data rcar_gen3_phy_usb2_data = {
+ .phy_usb2_ops = &rcar_gen3_phy_usb2_ops,
+ .no_adp_ctrl = false,
+};
+
+static const struct rcar_gen3_phy_drv_data rz_g1c_phy_usb2_data = {
+ .phy_usb2_ops = &rz_g1c_phy_usb2_ops,
+ .no_adp_ctrl = false,
+};
+
+static const struct rcar_gen3_phy_drv_data rz_g2l_phy_usb2_data = {
+ .phy_usb2_ops = &rcar_gen3_phy_usb2_ops,
+ .no_adp_ctrl = true,
+};
+
static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
{
.compatible = "renesas,usb2-phy-r8a77470",
- .data = &rz_g1c_phy_usb2_ops,
+ .data = &rz_g1c_phy_usb2_data,
},
{
.compatible = "renesas,usb2-phy-r8a7795",
- .data = &rcar_gen3_phy_usb2_ops,
+ .data = &rcar_gen3_phy_usb2_data,
},
{
.compatible = "renesas,usb2-phy-r8a7796",
- .data = &rcar_gen3_phy_usb2_ops,
+ .data = &rcar_gen3_phy_usb2_data,
},
{
.compatible = "renesas,usb2-phy-r8a77965",
- .data = &rcar_gen3_phy_usb2_ops,
+ .data = &rcar_gen3_phy_usb2_data,
+ },
+ {
+ .compatible = "renesas,rzg2l-usb2-phy",
+ .data = &rz_g2l_phy_usb2_data,
},
{
.compatible = "renesas,rcar-gen3-usb2-phy",
- .data = &rcar_gen3_phy_usb2_ops,
+ .data = &rcar_gen3_phy_usb2_data,
},
{ /* sentinel */ },
};
@@ -608,10 +651,10 @@ static enum usb_dr_mode rcar_gen3_get_dr_mode(struct device_node *np)
static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
{
+ const struct rcar_gen3_phy_drv_data *phy_data;
struct device *dev = &pdev->dev;
struct rcar_gen3_chan *channel;
struct phy_provider *provider;
- const struct phy_ops *phy_usb2_ops;
int ret = 0, i;
if (!dev->of_node) {
@@ -627,6 +670,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
if (IS_ERR(channel->base))
return PTR_ERR(channel->base);
+ channel->obint_enable_bits = USB2_OBINT_BITS;
/* get irq number here and request_irq for OTG in phy_init */
channel->irq = platform_get_irq_optional(pdev, 0);
channel->dr_mode = rcar_gen3_get_dr_mode(dev->of_node);
@@ -653,16 +697,21 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
* And then, phy-core will manage runtime pm for this device.
*/
pm_runtime_enable(dev);
- phy_usb2_ops = of_device_get_match_data(dev);
- if (!phy_usb2_ops) {
+
+ phy_data = of_device_get_match_data(dev);
+ if (!phy_data) {
ret = -EINVAL;
goto error;
}
+ channel->soc_no_adp_ctrl = phy_data->no_adp_ctrl;
+ if (phy_data->no_adp_ctrl)
+ channel->obint_enable_bits = USB2_OBINT_IDCHG_EN;
+
mutex_init(&channel->lock);
for (i = 0; i < NUM_OF_PHYS; i++) {
channel->rphys[i].phy = devm_phy_create(dev, NULL,
- phy_usb2_ops);
+ phy_data->phy_usb2_ops);
if (IS_ERR(channel->rphys[i].phy)) {
dev_err(dev, "Failed to create USB2 PHY\n");
ret = PTR_ERR(channel->rphys[i].phy);
--
2.17.1
