This driver has a potential issue which this driver is possible to
cause superfluous irqs after usb_pkt_pop() is called. So, after
the commit 3af32605289e ("usb: renesas_usbhs: fix error return
code of usbhsf_pkt_handler()") had been applied, we could observe
the following error happened when we used g_audio.
renesas_usbhs e6590000.usb: irq_ready run_error 1 : -22
To fix the issue, disable the tx or rx interrupt in usb_pkt_pop().
Fixes: 2743e7f90dc0 ("usb: renesas_usbhs: fix the usb_pkt_pop()")
Cc: <stable@xxxxxxxxxxxxxxx> # v4.4+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
I'm sorry for causing a trouble before [1], so I resend a suitable patch.
[1]
https://lore.kernel.org/linux-renesas-soc/TY2PR01MB3692555C6EAC8F02BC8B3D63D8329@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/
drivers/usb/renesas_usbhs/fifo.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c
index b5e7991dc7d9..a3c2b01ccf7b 100644
--- a/drivers/usb/renesas_usbhs/fifo.c
+++ b/drivers/usb/renesas_usbhs/fifo.c
@@ -101,6 +101,8 @@ static struct dma_chan *usbhsf_dma_chan_get(struct usbhs_fifo *fifo,
#define usbhsf_dma_map(p) __usbhsf_dma_map_ctrl(p, 1)
#define usbhsf_dma_unmap(p) __usbhsf_dma_map_ctrl(p, 0)
static int __usbhsf_dma_map_ctrl(struct usbhs_pkt *pkt, int map);
+static void usbhsf_tx_irq_ctrl(struct usbhs_pipe *pipe, int enable);
+static void usbhsf_rx_irq_ctrl(struct usbhs_pipe *pipe, int enable);
struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt)
{
struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);
@@ -123,6 +125,11 @@ struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt)
if (chan) {
dmaengine_terminate_all(chan);
usbhsf_dma_unmap(pkt);
+ } else {
+ if (usbhs_pipe_is_dir_in(pipe))
+ usbhsf_rx_irq_ctrl(pipe, 0);
+ else
+ usbhsf_tx_irq_ctrl(pipe, 0);
}
usbhs_pipe_clear_without_sequence(pipe, 0, 0);
--
2.25.1
