Hi Geert,
Thank you for the patch.
On Thu, Jun 10, 2021 at 11:37:23AM +0200, Geert Uytterhoeven wrote:
> Add support for the Renesas Salvator-X 2nd version development
> board equipped with an R-Car M3e-2G SiP.
>
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> ---
> arch/arm64/boot/dts/renesas/Makefile | 2 +
> .../boot/dts/renesas/r8a779m3-salvator-xs.dts | 46 +++++++++++++++++++
> 2 files changed, 48 insertions(+)
> create mode 100644 arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts
>
> diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
> index 4fa0d56602684faf..6a1061824a9f29f0 100644
> --- a/arch/arm64/boot/dts/renesas/Makefile
> +++ b/arch/arm64/boot/dts/renesas/Makefile
> @@ -66,3 +66,5 @@ dtb-$(CONFIG_ARCH_R8A779A0) += r8a779a0-falcon.dtb
> dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-salvator-xs.dtb
> dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb.dtb
> dtb-$(CONFIG_ARCH_R8A77951) += r8a779m1-ulcb-kf.dtb
> +
> +dtb-$(CONFIG_ARCH_R8A77961) += r8a779m3-salvator-xs.dtb
Same comment as or 07/14 regarding alphabetical ordering.
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> diff --git a/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts b/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts
> new file mode 100644
> index 0000000000000000..4ab26fd7233d62fc
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r8a779m3-salvator-xs.dts
> @@ -0,0 +1,46 @@
> +// SPDX-License-Identifier: (GPL-2.0 or MIT)
> +/*
> + * Device Tree Source for the Salvator-X 2nd version board with R-Car M3e-2G
> + *
> + * Copyright (C) 2021 Glider bv
> + *
> + * Based on r8a77961-salvator-xs.dts
> + * Copyright (C) 2018 Renesas Electronics Corp.
> + */
> +
> +/dts-v1/;
> +#include "r8a779m3.dtsi"
> +#include "salvator-xs.dtsi"
> +
> +/ {
> + model = "Renesas Salvator-X 2nd version board based on r8a779m3";
> + compatible = "renesas,salvator-xs", "renesas,r8a779m3",
> + "renesas,r8a77961";
> +
> + memory@48000000 {
> + device_type = "memory";
> + /* first 128MB is reserved for secure area. */
> + reg = <0x0 0x48000000 0x0 0x78000000>;
> + };
> +
> + memory@480000000 {
> + device_type = "memory";
> + reg = <0x4 0x80000000 0x0 0x80000000>;
> + };
> +
> + memory@600000000 {
> + device_type = "memory";
> + reg = <0x6 0x00000000 0x1 0x00000000>;
> + };
> +};
> +
> +&du {
> + clocks = <&cpg CPG_MOD 724>,
> + <&cpg CPG_MOD 723>,
> + <&cpg CPG_MOD 722>,
> + <&versaclock6 1>,
> + <&x21_clk>,
> + <&versaclock6 2>;
> + clock-names = "du.0", "du.1", "du.2",
> + "dclkin.0", "dclkin.1", "dclkin.2";
> +};
--
Regards,
Laurent Pinchart
