Hi Wolfram,
Thanks for your work.
On 2021-06-02 09:34:35 +0200, Wolfram Sang wrote:
> We have to bring the eMMC from sending-data state back to transfer state
> once we detected a CRC error (timeout) during tuning. So, send a stop
> command via mmc_abort_tuning().
>
> Fixes: 4f11997773b6 ("mmc: tmio: Add tuning support")
> Reported-by Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
> ---
>
> Ulf, I'd think that mmc_abort_tuning() should be named
> mmc_abort_tuning_cmd() instead. Because we don't actually abort the
> tuning as a whole in this function. What do you think? I can prepare a
> patch if you agree.
>
> drivers/mmc/host/renesas_sdhi_core.c | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c
> index 635bf31a6735..9029308c4a0f 100644
> --- a/drivers/mmc/host/renesas_sdhi_core.c
> +++ b/drivers/mmc/host/renesas_sdhi_core.c
> @@ -692,14 +692,19 @@ static int renesas_sdhi_execute_tuning(struct mmc_host *mmc, u32 opcode)
>
> /* Issue CMD19 twice for each tap */
> for (i = 0; i < 2 * priv->tap_num; i++) {
> + int cmd_error;
> +
> /* Set sampling clock position */
> sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET, i % priv->tap_num);
>
> - if (mmc_send_tuning(mmc, opcode, NULL) == 0)
> + if (mmc_send_tuning(mmc, opcode, &cmd_error) == 0)
> set_bit(i, priv->taps);
>
> if (sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_SMPCMP) == 0)
> set_bit(i, priv->smpcmp);
> +
> + if (cmd_error)
> + mmc_abort_tuning(mmc, opcode);
> }
>
> ret = renesas_sdhi_select_tuning(host);
> --
> 2.30.2
>
--
Regards,
Niklas Söderlund
