Re: [PATCH v3 13/14] PCI/MSI: Document the various ways of ending up with NO_MSI

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,


On 3/30/21 10:11 AM, Marc Zyngier wrote:
We have now three ways of ending up with NO_MSI being set.
Document them.

Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
Signed-off-by: Marc Zyngier <maz@xxxxxxxxxx>
---
  drivers/pci/msi.c | 11 +++++++++--
  1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index d9c73c173c14..217dc9f0231f 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -871,8 +871,15 @@ static int pci_msi_supported(struct pci_dev *dev, int nvec)
  	 * Any bridge which does NOT route MSI transactions from its
  	 * secondary bus to its primary bus must set NO_MSI flag on
  	 * the secondary pci_bus.
-	 * We expect only arch-specific PCI host bus controller driver
-	 * or quirks for specific PCI bridges to be setting NO_MSI.
+	 *
+	 * The NO_MSI flag can either be set directly by:
+	 * - arch-specific PCI host bus controller drivers (deprecated)
+	 * - quirks for specific PCI bridges
+	 *
+	 * or indirectly by platform-specific PCI host bridge drivers by
+	 * advertising the 'msi_domain' property, which results in
+	 * the NO_MSI flag when no MSI domain is found for this bridge
+	 * at probe time.

I have an ACPI machine with a gicv2 (no m), and a MSI region that isn't described by ACPI because its non-standard. In the past this tended to work because PCIe device drivers would fall back to legacy pci intx silently. But, with 5.13, it seems this series now triggers the WARN_ON_ONCE() in arch_setup_msi_irq, because duh, no MSI support.

Everything of course continues to work, it just gets this ugly splat on bootup telling me basically the machine doesn't support MSIs. So, I considered a few patches, including just basically setting nomsi if gicv2 && acpi, or eek a host bridge quirk.

None of these seem great, so how can this be fixed?

Thanks,




  	 */
  	for (bus = dev->bus; bus; bus = bus->parent)
  		if (bus->bus_flags & PCI_BUS_FLAGS_NO_MSI)





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux