[PATCH 1/3] arm64: dts: renesas: beacon: Fix USB extal reference

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The USB extal clock reference isn't associated to a crystal, it's
assoicated to a programmable clock, so remove the extal reference,
add the usb2_clksel.  Since usb_extal is referenced by the versaclock,
reference it here so the usb2_clksel can get the proper clock speed
of 50MHz.

Signed-off-by: Adam Ford <aford173@xxxxxxxxx>

diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
index 8d3a4d6ee885..bd3d26b2a2bb 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -319,8 +319,10 @@
 	status = "okay";
 };
 
-&usb_extal_clk {
-	clock-frequency = <50000000>;
+&usb2_clksel {
+	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>,
+		  <&versaclock5 3>, <&usb3s0_clk>;
+	status = "okay";
 };
 
 &usb3s0_clk {
-- 
2.17.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux