RE: [PATCH] dt-bindings: media: renesas,drif: Use graph schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

thank you for your patch.

> From: Rob Herring <robh@xxxxxxxxxx>
> Sent: 10 May 2021 21:35
> Subject: [PATCH] dt-bindings: media: renesas,drif: Use graph schema
> 
> Convert the renesas,drif binding schema to use the graph schema. The
> binding referred to video-interfaces.txt, but it doesn't actually use any
> properties from it as 'sync-active' is a custom property. As 'sync-active'
> is custom, it needs a type definition.
> 
> Cc: Fabrizio Castro <fabrizio.castro.jz@xxxxxxxxxxx>
> Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
> Cc: Ramesh Shanmugasundaram <rashanmu@xxxxxxxxx>
> Cc: linux-media@xxxxxxxxxxxxxxx
> Cc: linux-renesas-soc@xxxxxxxxxxxxxxx
> Signed-off-by: Rob Herring <robh@xxxxxxxxxx>

Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@xxxxxxxxxxx>

Best regards,
Fab

> ---
>  .../bindings/media/renesas,drif.yaml          | 20 +++++++------------
>  1 file changed, 7 insertions(+), 13 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/renesas,drif.yaml
> b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> index f1bdaeab4053..ce505a7c006a 100644
> --- a/Documentation/devicetree/bindings/media/renesas,drif.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,drif.yaml
> @@ -99,32 +99,26 @@ properties:
>        Indicates that the channel acts as primary among the bonded
> channels.
> 
>    port:
> -    type: object
> +    $ref: /schemas/graph.yaml#/properties/port
> +    unevaluatedProperties: false
>      description:
> -      Child port node corresponding to the data input, in accordance with
> the
> -      video interface bindings defined in
> -      Documentation/devicetree/bindings/media/video-interfaces.txt.
> -      The port node must contain at least one endpoint.
> +      Child port node corresponding to the data input. The port node must
> +      contain at least one endpoint.
> 
>      properties:
>        endpoint:
> -        type: object
> +        $ref: /schemas/graph.yaml#/$defs/endpoint-base
> +        unevaluatedProperties: false
> 
>          properties:
> -          remote-endpoint:
> -            description:
> -              A phandle to the remote tuner endpoint subnode in remote
> node
> -              port.
> -
>            sync-active:
> +            $ref: /schemas/types.yaml#/definitions/uint32
>              enum: [0, 1]
>              description:
>                Indicates sync signal polarity, 0/1 for low/high
> respectively.
>                This property maps to SYNCAC bit in the hardware manual.
> The
>                default is 1 (active high).
> 
> -        additionalProperties: false
> -
>  required:
>    - compatible
>    - reg
> --
> 2.27.0





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux