R-Car Gen3 Hardware Manual Errata for Rev. 0.52 of Nov 30, 2016, added
the configuration bit for bias pull-down control for the PRESET# pin on
R-Car M3-W. Add driver support for controlling pull-down on this pin.
Fixes: 2d40bd24274d2577 ("pinctrl: sh-pfc: r8a7796: Add bias pinconf support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
drivers/pinctrl/renesas/pfc-r8a7796.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/renesas/pfc-r8a7796.c b/drivers/pinctrl/renesas/pfc-r8a7796.c
index 44e9d2eea484ad5d..bbb1b436ded3123f 100644
--- a/drivers/pinctrl/renesas/pfc-r8a7796.c
+++ b/drivers/pinctrl/renesas/pfc-r8a7796.c
@@ -67,6 +67,7 @@
PIN_NOGP_CFG(QSPI1_MOSI_IO0, "QSPI1_MOSI_IO0", fn, CFG_FLAGS), \
PIN_NOGP_CFG(QSPI1_SPCLK, "QSPI1_SPCLK", fn, CFG_FLAGS), \
PIN_NOGP_CFG(QSPI1_SSL, "QSPI1_SSL", fn, CFG_FLAGS), \
+ PIN_NOGP_CFG(PRESET_N, "PRESET#", fn, SH_PFC_PIN_CFG_PULL_DOWN),\
PIN_NOGP_CFG(RPC_INT_N, "RPC_INT#", fn, CFG_FLAGS), \
PIN_NOGP_CFG(RPC_RESET_N, "RPC_RESET#", fn, CFG_FLAGS), \
PIN_NOGP_CFG(RPC_WP_N, "RPC_WP#", fn, CFG_FLAGS), \
@@ -6218,7 +6219,7 @@ static const struct pinmux_bias_reg pinmux_bias_regs[] = {
[ 4] = RCAR_GP_PIN(6, 29), /* USB30_OVC */
[ 5] = RCAR_GP_PIN(6, 30), /* GP6_30 */
[ 6] = RCAR_GP_PIN(6, 31), /* GP6_31 */
- [ 7] = SH_PFC_PIN_NONE,
+ [ 7] = PIN_PRESET_N, /* PRESET# */
[ 8] = SH_PFC_PIN_NONE,
[ 9] = SH_PFC_PIN_NONE,
[10] = SH_PFC_PIN_NONE,
--
2.25.1
