Re: [PATCH net-next v4 2/2] of: net: fix of_get_mac_addr_nvmem() for non-platform devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am 2021-04-16 17:19, schrieb Rob Herring:
On Fri, Apr 16, 2021 at 2:30 AM Michael Walle <michael@xxxxxxxx> wrote:

Am 2021-04-16 05:24, schrieb Benjamin Herrenschmidt:
> On Mon, 2021-04-12 at 19:47 +0200, Michael Walle wrote:
>>
>>  /**
>>   * of_get_phy_mode - Get phy mode for given device_node
>> @@ -59,15 +60,39 @@ static int of_get_mac_addr(struct device_node *np,
>> const char *name, u8 *addr)
>>  static int of_get_mac_addr_nvmem(struct device_node *np, u8 *addr)
>>  {
>>         struct platform_device *pdev = of_find_device_by_node(np);
>> +       struct nvmem_cell *cell;
>> +       const void *mac;
>> +       size_t len;
>>         int ret;
>>
>> -       if (!pdev)
>> -               return -ENODEV;
>> +       /* Try lookup by device first, there might be a
>> nvmem_cell_lookup
>> +        * associated with a given device.
>> +        */
>> +       if (pdev) {
>> +               ret = nvmem_get_mac_address(&pdev->dev, addr);
>> +               put_device(&pdev->dev);
>> +               return ret;
>> +       }
>> +
>
> This smells like the wrong band aid :)
>
> Any struct device can contain an OF node pointer these days.

But not all nodes might have an associated device, see DSA for example.

I believe what Ben is saying and what I said earlier is going from dev
-> OF node is right and OF node -> dev is wrong. If you only have an
OF node, then use an of_* function.

And as the name suggests of_get_mac_address() operates on a node. So
if a driver calls of_get_mac_address() it should work on the node. What
is wrong IMHO, is that the ethernet drivers where the corresponding
board
has a nvmem_cell_lookup registered is calling of_get_mac_address(node).
It should rather call eth_get_mac_address(dev) in the first place.

One would need to figure out if there is an actual device (with an
assiciated of_node), then call eth_get_mac_address(dev) and if there
isn't a device call of_get_mac_address(node).

Yes, I think we're all in agreement.

But I don't know if that is easy to figure out. Well, one could start
with just the device where nvmem_cell_lookup is used. Then we could
drop the workaround above.

Start with the ones just passing dev.of_node directly:

$ git grep 'of_get_mac_address(.*of_node)'

[..]

Before I'll try to come up with a patch for this, I'd like to get
your opinion on it.

(1) replacing of_get_mac_address(node) with eth_get_mac_address(dev)
    might sometimes lead to confusing comments like in
    drivers/net/ethernet/allwinner/sun4i-emac.c:

    /* Read MAC-address from DT */
    ret = of_get_mac_address(np, ndev->dev_addr);

    Do we live with that or should the new name somehow reflect that
    it is taken from the device tree.

(2) What do you think of eth_get_mac_address(ndev). That is, the
    second argument is missing and ndev->dev_addr is used.
    I'm unsure about it. We'd still need a second function for drivers
    which don't write ndev->dev_addr directly, but have some custom
    logic in between. OTOH it would be like eth_hw_addr_random(ndev).

-michael



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux