Re: [RFC v1 PATCH 3/3] driver: update all the code that use soc_device_match

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Geert Uytterhoeven wrote on Mon, Apr 19, 2021 at 11:03:24AM +0200:
> > This is going to need quite some more work to be acceptable, in my
> > opinion, but I think it should be possible.
> 
> In general, this is very hard to do, IMHO. Some drivers may be used on
> multiple platforms, some of them registering an SoC device, some of
> them not registering an SoC device.  So there is no way to know the
> difference between "SoC device not registered, intentionally", and
> "SoC device not yet registered".

Hm, good point, I was probably a bit too optimistic if there are devices
which don't register any soc yet have drivers which want one; I don't
see how to make the difference indeed... And that does mean we can't
just defer all the time.

> soc_device_match() should only be used as a last resort, to identify
> systems that cannot be identified otherwise.  Typically this is used for
> quirks, which should only be enabled on a very specific subset of
> systems.  IMHO such systems should make sure soc_device_match()
> is available early, by registering their SoC device early.

I definitely agree there, my suggestion to defer was only because I know
of no other way to influence the ordering of drivers loading reliably
and gave up on soc being init'd early.

In this particular case the problem is that since 7d981405d0fd ("soc:
imx8m: change to use platform driver") the soc probe tries to use the
nvmem driver for ocotp fuses for imx8m devices, which isn't ready yet.
So soc loading gets pushed back to the end of the list because it gets
defered and other drivers relying on soc_device_match get confused
because they wrongly think a device doesn't match a quirk when it
actually does.

If there is a way to ensure the nvmem driver gets loaded before the soc,
that would also solve the problem nicely, and avoid the need to mess
with all the ~50 drivers which use it.


Is there a way to control in what order drivers get loaded? Something in
the dtb perhaps?


Thanks,
-- 
Dominique



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux