Declare port@0 in the csi40 device node and leave it un-connected.
Each board .dts file will connect the port as it requires.
Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
---
arch/arm64/boot/dts/renesas/r8a77970.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
index 5a5d5649332a..e8f6352c3665 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -1106,6 +1106,10 @@ ports {
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ };
+
port@1 {
#address-cells = <1>;
#size-cells = <0>;
--
2.31.1
