Hi Jacopo, Thank you for the patch. On Mon, Apr 12, 2021 at 11:34:42AM +0200, Jacopo Mondi wrote: > Add a delay after the OV490 chip is put in reset state. The reset > signal shall be held for at least 250 useconds. > > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> With s/dealy/delay/ in the subject line, Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> > --- > drivers/media/i2c/rdacm21.c | 6 +++++- > 1 file changed, 5 insertions(+), 1 deletion(-) > > diff --git a/drivers/media/i2c/rdacm21.c b/drivers/media/i2c/rdacm21.c > index 553e3f03752b..6be8ce130e78 100644 > --- a/drivers/media/i2c/rdacm21.c > +++ b/drivers/media/i2c/rdacm21.c > @@ -469,7 +469,10 @@ static int rdacm21_initialize(struct rdacm21_device *dev) > if (ret) > return ret; > > - /* Enable GPIO1 and hold OV490 in reset during max9271 configuration. */ > + /* > + * Enable GPIO1 and hold OV490 in reset during max9271 configuration. > + * The reset signal has to be asserted for at least 250 useconds. > + */ > ret = max9271_enable_gpios(&dev->serializer, MAX9271_GPIO1OUT); > if (ret) > return ret; > @@ -477,6 +480,7 @@ static int rdacm21_initialize(struct rdacm21_device *dev) > ret = max9271_clear_gpios(&dev->serializer, MAX9271_GPIO1OUT); > if (ret) > return ret; > + usleep_range(250, 500); > > ret = max9271_configure_gmsl_link(&dev->serializer); > if (ret) -- Regards, Laurent Pinchart
