On Tue, Apr 13, 2021 at 2:33 AM Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
>
> Hi Adam,
>
> On Mon, Apr 12, 2021 at 3:27 PM Adam Ford <aford173@xxxxxxxxx> wrote:
> > For devices that use a programmable clock for the AVB reference clock,
> > the driver may need to enable them. Add code to find the optional clock
> > and enable it when available.
> >
> > Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
> > Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
> >
> > ---
> > V4: Eliminate the NULL check when disabling refclk, and add a line
> > to disable the refclk if there is a failure after it's been
> > initialized.
>
> Thanks for the update!
>
> > --- a/drivers/net/ethernet/renesas/ravb_main.c
> > +++ b/drivers/net/ethernet/renesas/ravb_main.c
> > @@ -2148,6 +2148,13 @@ static int ravb_probe(struct platform_device *pdev)
> > goto out_release;
> > }
> >
> > + priv->refclk = devm_clk_get_optional(&pdev->dev, "refclk");
> > + if (IS_ERR(priv->refclk)) {
> > + error = PTR_ERR(priv->refclk);
> > + goto out_release;
>
> Note that this will call clk_disable_unprepare() in case of failure, which is
> fine, as that function is a no-op in case of a failed clock.
Geert,
A bot reported that if I jump to out_release may try to free a clock
if some instances where priv isn't defined.
Currently, the priv->clk isn't freed either. I have heard some
back-and-forth discussions in other threads on whether or not devm
functions auto free or not.
I'm fine with sending a V5 to make the free for the refclock happen
only when the priv has successfully initialized. Should I also add
one for freeing priv->clk and change all the other goto out_release
commands to point to this new section?
I am thinking it would like something like:
free_refclk:
clk_disable_unprepare(priv->refclk);
free_clk;
clk_disable_unprepare(priv->clk);
out_release:
free_netdev(ndev);
....
adam
>
> > + }
> > + clk_prepare_enable(priv->refclk);
> > +
> > ndev->max_mtu = 2048 - (ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN);
> > ndev->min_mtu = ETH_MIN_MTU;
> >
> > @@ -2244,6 +2251,7 @@ static int ravb_probe(struct platform_device *pdev)
> > if (chip_id != RCAR_GEN2)
> > ravb_ptp_stop(ndev);
> > out_release:
> > + clk_disable_unprepare(priv->refclk);
> > free_netdev(ndev);
> >
> > pm_runtime_put(&pdev->dev);
>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
