Re: [PATCH v2 05/15] PCI: xilinx: Convert to MSI domains

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 24 Mar 2021 13:56:16 +0000,
Bharat Kumar Gogada <bharatku@xxxxxxxxxx> wrote:

> > Thanks for that. Can you please try the following patch and let me know if it
> > helps?
> > 
> > Thanks,
> > 
> > 	M.
> > 
> > diff --git a/drivers/pci/controller/pcie-xilinx.c b/drivers/pci/controller/pcie-
> > xilinx.c
> > index ad9abf405167..14001febf59a 100644
> > --- a/drivers/pci/controller/pcie-xilinx.c
> > +++ b/drivers/pci/controller/pcie-xilinx.c
> > @@ -194,8 +194,18 @@ static struct pci_ops xilinx_pcie_ops = {
> > 
> >  /* MSI functions */
> > 
> > +static void xilinx_msi_top_irq_ack(struct irq_data *d) {
> > +	/*
> > +	 * xilinx_pcie_intr_handler() will have performed the Ack.
> > +	 * Eventually, this should be fixed and the Ack be moved in
> > +	 * the respective callbacks for INTx and MSI.
> > +	 */
> > +}
> > +
> >  static struct irq_chip xilinx_msi_top_chip = {
> >  	.name		= "PCIe MSI",
> > +	.irq_ack	= xilinx_msi_top_irq_ack,
> >  };
> > 
> >  static int xilinx_msi_set_affinity(struct irq_data *d, const struct cpumask
> > *mask, bool force) @@ -206,7 +216,7 @@ static int
> > xilinx_msi_set_affinity(struct irq_data *d, const struct cpumask *mas  static
> > void xilinx_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)  {
> >  	struct xilinx_pcie_port *pcie = irq_data_get_irq_chip_data(data);
> > -	phys_addr_t pa = virt_to_phys(pcie);
> > +	phys_addr_t pa = ALIGN_DOWN(virt_to_phys(pcie), SZ_4K);
> > 
> >  	msg->address_lo = lower_32_bits(pa);
> >  	msg->address_hi = upper_32_bits(pa);
> > @@ -468,7 +478,7 @@ static int xilinx_pcie_init_irq_domain(struct
> > xilinx_pcie_port *port)
> > 
> >  	/* Setup MSI */
> >  	if (IS_ENABLED(CONFIG_PCI_MSI)) {
> > -		phys_addr_t pa = virt_to_phys(port);
> > +		phys_addr_t pa = ALIGN_DOWN(virt_to_phys(port), SZ_4K);
> > 
> >  		ret = xilinx_allocate_msi_domains(port);
> >  		if (ret)
> > 
> Thanks Marc.
> With above patch now everything works fine, tested a Samsung NVMe SSD. 
> tst~# lspci
> 00:00.0 PCI bridge: Xilinx Corporation Device 0706
> 01:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller 172Xa/172Xb (rev 01)

Great, thanks for giving it a shot. Can I take this as a Tested-by:
tag?

Thanks,

	M.

-- 
Without deviation from the norm, progress is not possible.



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux