[RFC PATCH 01/11] dt-bindings: drm/bridge: ti-sn65dsi8: Make enable GPIO optional

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The SN65DSI86 EN pin can be hardwired to a high level, or connected to a
global reset signal, not controllable by the kernel. Make it optional in
those cases.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
 .../devicetree/bindings/display/bridge/ti,sn65dsi86.yaml         | 1 -
 1 file changed, 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
index 26932d2e86ab..2506765cb338 100644
--- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
@@ -150,7 +150,6 @@ properties:
 required:
   - compatible
   - reg
-  - enable-gpios
   - vccio-supply
   - vpll-supply
   - vcca-supply
-- 
Regards,

Laurent Pinchart




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux