[PATCH v3 09/19] media: i2c: max9271: Introduce wake_up() function

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The MAX9271 chip manual prescribes a delay of 5 milliseconds
after the chip exits from low power state.

Add a new function to the max9271 library driver that wakes up the chip
with a dummy i2c transaction and implements the correct delay of 5
milliseconds after the chip exits from low power state.

Use the newly introduced function in the rdacm20 and rdacm21 camera
drivers. The former was not respecting the required delay while the
latter was waiting for a too-short timeout.

Do not handle the initial i2c address configuration in the library
driver function as the camera module drivers control address
reprogramming.

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
---
 drivers/media/i2c/max9271.c | 7 +++++++
 drivers/media/i2c/max9271.h | 9 +++++++++
 drivers/media/i2c/rdacm20.c | 2 +-
 drivers/media/i2c/rdacm21.c | 3 +--
 4 files changed, 18 insertions(+), 3 deletions(-)

diff --git a/drivers/media/i2c/max9271.c b/drivers/media/i2c/max9271.c
index 2c7dc7fb9846..f7bfe7266763 100644
--- a/drivers/media/i2c/max9271.c
+++ b/drivers/media/i2c/max9271.c
@@ -80,6 +80,13 @@ static int max9271_pclk_detect(struct max9271_device *dev)
 	return -EIO;
 }
 
+void max9271_wake_up(struct max9271_device *dev)
+{
+	i2c_smbus_read_byte(dev->client);
+	usleep_range(5000, 8000);
+}
+EXPORT_SYMBOL_GPL(max9271_wake_up);
+
 int max9271_set_serial_link(struct max9271_device *dev, bool enable)
 {
 	int ret;
diff --git a/drivers/media/i2c/max9271.h b/drivers/media/i2c/max9271.h
index d78fb21441e9..dc5e4e70ba6f 100644
--- a/drivers/media/i2c/max9271.h
+++ b/drivers/media/i2c/max9271.h
@@ -85,6 +85,15 @@ struct max9271_device {
 	struct i2c_client *client;
 };
 
+/**
+ * max9271_wake_up() - Wake up the serializer by issuing an i2c transaction
+ * @dev: The max9271 device
+ *
+ * This function shall be called before any other interaction with the
+ * serializer.
+ */
+void max9271_wake_up(struct max9271_device *dev);
+
 /**
  * max9271_set_serial_link() - Enable/disable serial link
  * @dev: The max9271 device
diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c
index 3cab6af7eba6..2881e752efbe 100644
--- a/drivers/media/i2c/rdacm20.c
+++ b/drivers/media/i2c/rdacm20.c
@@ -547,7 +547,7 @@ static int rdacm20_initialize(struct rdacm20_device *dev)
 
 	/* Verify communication with the MAX9271: ping to wakeup. */
 	dev->serializer->client->addr = MAX9271_DEFAULT_ADDR;
-	i2c_smbus_read_byte(dev->serializer->client);
+	max9271_wake_up(dev->serializer);
 
 	/* Serial link disabled during config as it needs a valid pixel clock. */
 	ret = max9271_set_serial_link(dev->serializer, false);
diff --git a/drivers/media/i2c/rdacm21.c b/drivers/media/i2c/rdacm21.c
index 318a3b40d9e6..1706a59bfd58 100644
--- a/drivers/media/i2c/rdacm21.c
+++ b/drivers/media/i2c/rdacm21.c
@@ -511,8 +511,7 @@ static int rdacm21_initialize(struct rdacm21_device *dev)
 
 	/* Verify communication with the MAX9271: ping to wakeup. */
 	dev->serializer.client->addr = MAX9271_DEFAULT_ADDR;
-	i2c_smbus_read_byte(dev->serializer.client);
-	usleep_range(3000, 5000);
+	max9271_wake_up(&dev->serializer);
 
 	/* Enable reverse channel and disable the serial link. */
 	ret = max9271_set_serial_link(&dev->serializer, false);
-- 
2.30.0




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux