Enable the noise immunity threshold at the end of the rdacm20 initialization routine. The rdacm20 camera module has been so far tested with a startup delay that allowed the embedded MCU to program the serializer. If the initialization routine is run before the MCU programs the serializer and the image sensor and their addresses gets changed by the rdacm20 driver it is required to manually enable the noise immunity threshold to make the communication on the control channel more reliable. Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx> Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx> --- drivers/media/i2c/rdacm20.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c index 90eb73f0e6e9..f7fd5ae955d0 100644 --- a/drivers/media/i2c/rdacm20.c +++ b/drivers/media/i2c/rdacm20.c @@ -541,7 +541,13 @@ static int rdacm20_initialize(struct rdacm20_device *dev) dev_info(dev->dev, "Identified MAX9271 + OV10635 device\n"); - return 0; + /* + * Set reverse channel high threshold to increase noise immunity. + * + * This should be compensated by increasing the reverse channel + * amplitude on the remote deserializer side. + */ + return max9271_set_high_threshold(&dev->serializer, true); } static int rdacm20_probe(struct i2c_client *client) -- 2.30.0
