Hi Biju,
On Mon, Mar 15, 2021 at 09:15:00AM +0000, Biju Das wrote:
> > Subject: Re: [PATCH 1/2] media: v4l: vsp1: Fix bru null pointer access
> > On Thu, Mar 11, 2021 at 07:15:01AM +0000, Biju Das wrote:
> > > > Subject: Re: [PATCH 1/2] media: v4l: vsp1: Fix bru null pointer
> > > > access
> > > >
> > > > Hi Biju,
> > > >
> > > > On 01/03/2021 12:08, Biju Das wrote:
> > > > > RZ/G2L SoC has only BRS. This patch fixes null pointer access,when
> > > > > only BRS is enabled.
> > > > >
> > > > > Fixes: cbb7fa49c7466("media: v4l: vsp1: Rename BRU to BRx")
> >
> > Given that RZ/G2L isn't supported in mainline, this is hardly a fix, is it
> > ?
>
> I agree RZ/G2L is a new SoC.
>
> Please see my comments for other patch. I have added fixes tag based
> on pluggable feature on VSP driver.
>
> If we have BRS and BRU, we can select either BRS or BRU. For eg:-
> VSPDL in R-Car H3/H3-N/M3-N and also R-Car V3M/V3H we have both BRS
> and BRU. Since both are present on this SoC's, it won't trigger the
> null pointer issue.
>
> But as new SoC's like RZ/G2L have only BRS.
I agree that this issue needs to be addressed, my point was that it
shouldn't have been merged in the -fixes branch (which will likely
result in the patch being backported to stable branches) but in the
-next branch, given that the problem it solves can't be triggered yet by
any platform supported in mainline.
> > > > > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > > > > ---
> > > > > drivers/media/platform/vsp1/vsp1_drm.c | 2 +-
> > > > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > > > >
> > > > > diff --git a/drivers/media/platform/vsp1/vsp1_drm.c
> > > > > b/drivers/media/platform/vsp1/vsp1_drm.c
> > > > > index 86d5e3f4b1ff..f6d2f47a4058 100644
> > > > > --- a/drivers/media/platform/vsp1/vsp1_drm.c
> > > > > +++ b/drivers/media/platform/vsp1/vsp1_drm.c
> > > > > @@ -245,7 +245,7 @@ static int vsp1_du_pipeline_setup_brx(struct
> > > > vsp1_device *vsp1,
> > > > > brx = &vsp1->bru->entity;
> > > > > else if (pipe->brx && !drm_pipe->force_brx_release)
> > > > > brx = pipe->brx;
> > > > > - else if (!vsp1->bru->entity.pipe)
> > > > > + else if (vsp1_feature(vsp1, VSP1_HAS_BRU) &&
> > > > > +!vsp1->bru->entity.pipe)
> > > > > brx = &vsp1->bru->entity;
> > > > > else
> > > > > brx = &vsp1->brs->entity;
> > > >
> > > >
> > > > The comments here describe that the choice to start at the BRU is
> > > > arbitrary, so if we could confirm that there will always be a BRS
> > > > otherwise, we could swap those to save an extra feature check.
> > >
> > > As long as we are supporting composition(Multiple inputs with Blend
> > > and Raster operations) There will be either BRU or BRS or both in
> > > R-Car Gen3|RZ/G2 SoC's. Currently this is the case with all SoC variant
> > > of this families.
> >
> > Given that the function is called vsp1_du_pipeline_setup_brx(), I think we
> > can assume there will be either a BRU or a BRS :-)
> >
> > How many RPF instances does the RG/G2L VSPD have ?
>
> 2 RPF, 1WPF , 1 BRS, 1 LUT and 1 LIF
Thank you.
> > > > But as we have both vsp1_feature(vsp1, VSP1_HAS_BRU) and
> > > > vsp1_feature(vsp1, VSP1_HAS_BRS), I don't think that's the case.
> > > >
> > > > I'd almost want to check for vsp1_feature(vsp1, VSP1_HAS_BRS) on the
> > > > brs->entity line to keep the symmetry ... but it wouldn't be needed,
> > > > brs->as
> > > > it should fall through. If there isn't a BRS there must be a BRU or
> > > > we wouldn't be setting up a brx in the first place ;-)
> > > >
> > > > So I think what you have is good.
> > > >
> > > > Reviewed-by: Kieran Bingham
> > > > <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
--
Regards,
Laurent Pinchart
