Hi Hans,
Thanks for your feedback.
On 2021-01-25 10:44:48 +0100, Hans Verkuil wrote:
> On 15/01/2021 01:21, Niklas Söderlund wrote:
> > Instead of restarting the R-Car CSI-2 receiver if a transmission error
> > is detected inform the R-Car VIN driver of the error so it can stop the
> > whole pipeline and inform user-space. This is done to reflect a updated
> > usage recommendation in later versions of the datasheet.
> >
> > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
> > ---
> > drivers/media/platform/rcar-vin/rcar-csi2.c | 14 ++++++--------
> > 1 file changed, 6 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
> > index 945d2eb8723367f0..a7212ecc46572a3b 100644
> > --- a/drivers/media/platform/rcar-vin/rcar-csi2.c
> > +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
> > @@ -773,21 +773,19 @@ static irqreturn_t rcsi2_irq(int irq, void *data)
> >
> > rcsi2_write(priv, INTERRSTATE_REG, err_status);
> >
> > - dev_info(priv->dev, "Transfer error, restarting CSI-2 receiver\n");
> > -
> > return IRQ_WAKE_THREAD;
> > }
> >
> > static irqreturn_t rcsi2_irq_thread(int irq, void *data)
> > {
> > struct rcar_csi2 *priv = data;
> > + struct v4l2_event event = {
> > + .type = V4L2_EVENT_EOS,
> > + };
> >
> > - mutex_lock(&priv->lock);
> > - rcsi2_stop(priv);
> > - usleep_range(1000, 2000);
> > - if (rcsi2_start(priv))
> > - dev_warn(priv->dev, "Failed to restart CSI-2 receiver\n");
> > - mutex_unlock(&priv->lock);
> > + dev_err(priv->dev, "Transfer error detected.\n");
>
> You probably want to call vb2_queue_error() here. Typically once
> something like this happens you have to restart everything and marking
> the queue as 'error' will ensure that VIDIOC_QBUF will return an error
> until the queue is reset (STREAMOFF).
The CSI-2 driver is a bridge driver and does not deal with buffers.
Instead the idea here is to signal EOS so that the VIN driver (and
user-space) can detect it and indeed as you point out deal with
signaling vb2 error.
I will respin this series as it needs to be rebased anyhow.
>
> It doesn't hurt to also raise the EOS event, I'm fine with that.
>
> Regards,
>
> Hans
>
> > +
> > + v4l2_subdev_notify_event(&priv->subdev, &event);
> >
> > return IRQ_HANDLED;
> > }
> >
>
--
Regards,
Niklas Söderlund
