On Thu, 18 Feb 2021 at 13:01, Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> wrote: > > RPM handling has been improved twice since this comment, and also SCC > handling has been improved a lot. All the testing we did (Geert's and > Niklas' and Wolfram's board farms) with the workaround removed did not > lead to problems, so it is time to get rid of it to the best of our > knowledge. > > Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> > Tested-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> > Tested-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx> Applied for next, thanks! Kind regards Uffe > --- > drivers/mmc/host/tmio_mmc_core.c | 9 --------- > 1 file changed, 9 deletions(-) > > diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c > index 49c2d406c48e..2478a91e84b2 100644 > --- a/drivers/mmc/host/tmio_mmc_core.c > +++ b/drivers/mmc/host/tmio_mmc_core.c > @@ -1160,15 +1160,6 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host) > mmc->caps & MMC_CAP_NEEDS_POLL || > !mmc_card_is_removable(mmc)); > > - /* > - * On Gen2+, eMMC with NONREMOVABLE currently fails because native > - * hotplug gets disabled. It seems RuntimePM related yet we need further > - * research. Since we are planning a PM overhaul anyway, let's enforce > - * for now the device being active by enabling native hotplug always. > - */ > - if (pdata->flags & TMIO_MMC_MIN_RCAR2) > - _host->native_hotplug = true; > - > /* > * While using internal tmio hardware logic for card detection, we need > * to ensure it stays powered for it to work. > -- > 2.30.0 >
