Re: [PATCH] i2c: rcar: implement atomic transfers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> On 02/18/2021 11:49 AM Wolfram Sang <wsa@xxxxxxxxxxxxx> wrote:
> > Implements atomic transfers. Tested by rebooting an r8a7790 Lager board
> > after connecting the i2c-rcar controller to the PMIC in
> > arch/arm/boot/dts/r8a7790-lager.dts like so:
> > 
> > 		compatible = "i2c-demux-pinctrl";
> > 		pinctrl-names = "default";
> > 		pinctrl-0 = <&pmic_irq_pins>;
> > -		i2c-parent = <&iic3>, <&i2c3>;
> > +		i2c-parent = <&i2c3>, <&iic3>;
> > 		i2c-bus-name = "i2c-pwr";
> > 		#address-cells = <1>;
> > 		#size-cells = <0>;
> > 
> > Signed-off-by: Ulrich Hecht <uli+renesas@xxxxxxxx>
> 
> Doesn't apply against 5.11 or i2c/for-next. What is the base here?

renesas-drivers-2021-02-09-v5.11-rc7

CU
Uli



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux