With the camera modules initialization routines now running with
the noise immunity threshold enabled, it is possible to restore
the bit rate of the I2C transactions transported on the GMSL control
channel to 339 Kbps.
The 339 Kbps bit rate represents the default setting for the serializer
and the deserializer chips, and the setup/hold time and slave timeout
time in use are calibrate to support that rate.
Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
---
drivers/media/i2c/max9286.c | 2 +-
drivers/media/i2c/rdacm20.c | 2 +-
drivers/media/i2c/rdacm21.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c
index aa01d5bb79ef..0b620f2f8c41 100644
--- a/drivers/media/i2c/max9286.c
+++ b/drivers/media/i2c/max9286.c
@@ -330,7 +330,7 @@ static int max9286_i2c_mux_init(struct max9286_priv *priv)
static void max9286_configure_i2c(struct max9286_priv *priv, bool localack)
{
u8 config = MAX9286_I2CSLVSH_469NS_234NS | MAX9286_I2CSLVTO_1024US |
- MAX9286_I2CMSTBT_105KBPS;
+ MAX9286_I2CMSTBT_339KBPS;
if (localack)
config |= MAX9286_I2CLOCACK;
diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c
index 0632ef98eea7..d45e8b0e52a0 100644
--- a/drivers/media/i2c/rdacm20.c
+++ b/drivers/media/i2c/rdacm20.c
@@ -450,7 +450,7 @@ static int rdacm20_init(struct v4l2_subdev *sd, unsigned int val)
ret = max9271_configure_i2c(&dev->serializer,
MAX9271_I2CSLVSH_469NS_234NS |
MAX9271_I2CSLVTO_1024US |
- MAX9271_I2CMSTBT_105KBPS);
+ MAX9271_I2CMSTBT_339KBPS);
if (ret)
return ret;
diff --git a/drivers/media/i2c/rdacm21.c b/drivers/media/i2c/rdacm21.c
index 80b6f16f87a8..552985026458 100644
--- a/drivers/media/i2c/rdacm21.c
+++ b/drivers/media/i2c/rdacm21.c
@@ -442,7 +442,7 @@ static int rdacm21_init(struct v4l2_subdev *sd, unsigned int val)
ret = max9271_configure_i2c(&dev->serializer,
MAX9271_I2CSLVSH_469NS_234NS |
MAX9271_I2CSLVTO_1024US |
- MAX9271_I2CMSTBT_105KBPS);
+ MAX9271_I2CMSTBT_339KBPS);
if (ret)
return ret;
--
2.30.0
