Re: [PATCH v4 00/31] v4l: add support for multiplexed streams

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi all,

On 28/03/2019 22:05, Jacopo Mondi wrote:
> Hello,
>    new iteration of multiplexed stream support patch series.
> 
> V3 available at:
> https://patchwork.kernel.org/cover/10839889/
> 
> V2 sent by Niklas is available at:
> https://patchwork.kernel.org/cover/10573817/
> 
> Series available at:
> git://jmondi.org/linux v4l2-mux/media-master/v4

I'm trying to understand how these changes can be used with virtual
channels and also with embedded data.

I have an SoC with two CSI-2 RX ports, both of which connect to a
processing block with 8 DMA engines. Each of the DMA engines can be
programmed to handle a certain virtual channel and datatype.

The board has a multiplexer, connected to 4 cameras, and the multiplexer
connects to SoC's CSI-2 RX port. This board has just one multiplexer
connected, but, of course, both RX ports could have a multiplexer,
amounting to total 8 cameras.

So, in theory, there could be 16 streams to be handled (4 pixel streams
and 4 embedded data streams for both RX ports). With only 8 DMA engines
available, the driver has to manage them dynamically, reserving a DMA
engine when a stream is started.

My confusion is with the /dev/video nodes. I think it would be logical
to create 8 of them, one for each DMA engine (or less, if I know there
is only, say, 1 camera connected, in which case 2 nodes would be
enough). But in that case how does the user know what data is being
received from that node? In other words, how to connect, say,
/dev/video0 to second camera's embedded data stream?

Another option would be to create 16 /dev/video nodes, and document that
first one maps to virtual channel 0 + pixel data, second to virtual
channel 0 + embedded data, and so on. And only allow 8 of them to be
turned on at a time. But I don't like this idea much.

The current driver architecture is such that the multiplexer is modeled
with a subdev with 4 sink pads and one source pad, the SoC's RX ports
are subdevs with a single sink and a single output pad, and then there
are the video devices connected to RX's source pad.

And while I can connect the video node's pad to the source pad on either
of the RX ports, I don't think I have any way to define which stream it
receives.

Does that mean that each RX port subdev should instead have 8 source
pads? Isn't a pad like a physical connection? There's really just one
output from the RX port, with multiplexed streams, so 8 pads doesn't
sound right.

 Tomi



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux