Re: [PATCH v3 4/6] dt-bindings: display: rockchip: dw-hdmi: Convert binding to YAML

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

On Mon, Jan 11, 2021 at 05:01:36PM -0600, Rob Herring wrote:
> On Wed, Jan 06, 2021 at 05:17:55PM +0200, Laurent Pinchart wrote:
> > Hi Rob,
> > 
> > Given that the maintainers property is mandatory in the schema, what's
> > the procedure when no maintainer steps up for a converter YAML binding ?
> 
> Delete it if no one cares...
> 
> Typically we just put a subsystem or platform maintainer.

Do you mean dropping dw_hdmi-rockchip.txt completely, even if it's in
use by a driver ?

> > On Tue, Jan 05, 2021 at 08:08:16AM +0200, Laurent Pinchart wrote:
> > > Convert the Rockchip HDMI TX text binding to YAML.
> > > 
> > > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> > > ---
> > > Changes since v2:
> > > 
> > > - Use Mark's @gmail.com e-mail address as the @rock-chips.com address
> > >   bounces
> > > 
> > > Changes since v1:
> > > 
> > > - Drop pinctrl-0 and pinctrl-1
> > > - Use unevaluatedProperties instead of additionalProperties
> > > - Drop reg and interrupts as they're checked in the base schema
> > > - Rebase on top of OF graph schema, dropped redundant properties
> > > - Fix identation for enum entries
> > > - Tidy up clock names
> > > ---
> > >  .../display/rockchip/dw_hdmi-rockchip.txt     |  74 --------
> > >  .../display/rockchip/rockchip,dw-hdmi.yaml    | 158 ++++++++++++++++++
> > >  2 files changed, 158 insertions(+), 74 deletions(-)
> > >  delete mode 100644 Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
> > >  create mode 100644 Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
> > > 
> > > diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
> > > deleted file mode 100644
> > > index 3d32ce137e7f..000000000000
> > > --- a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt
> > > +++ /dev/null
> > > @@ -1,74 +0,0 @@
> > > -Rockchip DWC HDMI TX Encoder
> > > -============================
> > > -
> > > -The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
> > > -with a companion PHY IP.
> > > -
> > > -These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
> > > -Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the
> > > -following device-specific properties.
> > > -
> > > -
> > > -Required properties:
> > > -
> > > -- compatible: should be one of the following:
> > > -		"rockchip,rk3228-dw-hdmi"
> > > -		"rockchip,rk3288-dw-hdmi"
> > > -		"rockchip,rk3328-dw-hdmi"
> > > -		"rockchip,rk3399-dw-hdmi"
> > > -- reg: See dw_hdmi.txt.
> > > -- reg-io-width: See dw_hdmi.txt. Shall be 4.
> > > -- interrupts: HDMI interrupt number
> > > -- clocks: See dw_hdmi.txt.
> > > -- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt.
> > > -- ports: See dw_hdmi.txt. The DWC HDMI shall have a single port numbered 0
> > > -  corresponding to the video input of the controller. The port shall have two
> > > -  endpoints, numbered 0 and 1, connected respectively to the vopb and vopl.
> > > -- rockchip,grf: Shall reference the GRF to mux vopl/vopb.
> > > -
> > > -Optional properties
> > > -
> > > -- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master
> > > -  or the functionally-reduced I2C master contained in the DWC HDMI. When
> > > -  connected to a system I2C master this property contains a phandle to that
> > > -  I2C master controller.
> > > -- clock-names: See dw_hdmi.txt. The "cec" clock is optional.
> > > -- clock-names: May contain "cec" as defined in dw_hdmi.txt.
> > > -- clock-names: May contain "grf", power for grf io.
> > > -- clock-names: May contain "vpll", external clock for some hdmi phy.
> > > -- phys: from general PHY binding: the phandle for the PHY device.
> > > -- phy-names: Should be "hdmi" if phys references an external phy.
> > > -
> > > -Optional pinctrl entry:
> > > -- If you have both a "unwedge" and "default" pinctrl entry, dw_hdmi
> > > -  will switch to the unwedge pinctrl state for 10ms if it ever gets an
> > > -  i2c timeout.  It's intended that this unwedge pinctrl entry will
> > > -  cause the SDA line to be driven low to work around a hardware
> > > -  errata.
> > > -
> > > -Example:
> > > -
> > > -hdmi: hdmi@ff980000 {
> > > -	compatible = "rockchip,rk3288-dw-hdmi";
> > > -	reg = <0xff980000 0x20000>;
> > > -	reg-io-width = <4>;
> > > -	ddc-i2c-bus = <&i2c5>;
> > > -	rockchip,grf = <&grf>;
> > > -	interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> > > -	clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
> > > -	clock-names = "iahb", "isfr";
> > > -	ports {
> > > -		hdmi_in: port {
> > > -			#address-cells = <1>;
> > > -			#size-cells = <0>;
> > > -			hdmi_in_vopb: endpoint@0 {
> > > -				reg = <0>;
> > > -				remote-endpoint = <&vopb_out_hdmi>;
> > > -			};
> > > -			hdmi_in_vopl: endpoint@1 {
> > > -				reg = <1>;
> > > -				remote-endpoint = <&vopl_out_hdmi>;
> > > -			};
> > > -		};
> > > -	};
> > > -};
> > > diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
> > > new file mode 100644
> > > index 000000000000..d3b2f87f152a
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml
> > > @@ -0,0 +1,158 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-hdmi.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Rockchip DWC HDMI TX Encoder
> > > +
> > > +maintainers:
> > > +  - Mark Yao <markyao0591@xxxxxxxxx>
> > > +
> > > +description: |
> > > +  The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
> > > +  with a companion PHY IP.
> > > +
> > > +allOf:
> > > +  - $ref: ../bridge/synopsys,dw-hdmi.yaml#
> > > +
> > > +properties:
> > > +  compatible:
> > > +    enum:
> > > +      - rockchip,rk3228-dw-hdmi
> > > +      - rockchip,rk3288-dw-hdmi
> > > +      - rockchip,rk3328-dw-hdmi
> > > +      - rockchip,rk3399-dw-hdmi
> > > +
> > > +  reg-io-width:
> > > +    const: 4
> > > +
> > > +  clocks:
> > > +    minItems: 2
> > > +    maxItems: 5
> > > +    items:
> > > +      - {}
> > > +      - {}
> > > +      # The next three clocks are all optional, but shall be specified in this
> > > +      # order when present.
> > > +      - description: The HDMI CEC controller main clock
> > > +      - description: Power for GRF IO
> > > +      - description: External clock for some HDMI PHY
> > > +
> > > +  clock-names:
> > > +    minItems: 2
> > > +    maxItems: 5
> > > +    items:
> > > +      - {}
> > > +      - {}
> > > +      - enum:
> > > +          - cec
> > > +          - grf
> > > +          - vpll
> > > +      - enum:
> > > +          - grf
> > > +          - vpll
> > > +      - const: vpll
> > > +
> > > +  ddc-i2c-bus:
> > > +    $ref: /schemas/types.yaml#/definitions/phandle
> > > +    description:
> > > +      The HDMI DDC bus can be connected to either a system I2C master or the
> > > +      functionally-reduced I2C master contained in the DWC HDMI. When connected
> > > +      to a system I2C master this property contains a phandle to that I2C
> > > +      master controller.
> > > +
> > > +  phys:
> > > +    maxItems: 1
> > > +    description: The HDMI PHY
> > > +
> > > +  phy-names:
> > > +    const: hdmi
> > > +
> > > +  pinctrl-names:
> > > +    description:
> > > +      The unwedge pinctrl entry shall drive the DDC SDA line low. This is
> > > +      intended to work around a hardware errata that can cause the DDC I2C
> > > +      bus to be wedged.
> > > +    items:
> > > +      - const: default
> > > +      - const: unwedge
> > > +
> > > +  ports:
> > > +    $ref: /schemas/graph.yaml#/properties/ports
> > > +
> > > +    properties:
> > > +      port:
> > > +        $ref: /schemas/graph.yaml#/$defs/port-base
> > > +        unevaluatedProperties: false
> > > +        description: Input of the DWC HDMI TX
> > > +
> > > +        properties:
> > > +          endpoint@0:
> > > +            $ref: /schemas/graph.yaml#/$defs/endpoint-base
> > > +            unevaluatedProperties: false
> > > +            description: Connection to the VOPB
> > > +
> > > +          endpoint@1:
> > > +            $ref: /schemas/graph.yaml#/$defs/endpoint-base
> > > +            unevaluatedProperties: false
> > > +            description: Connection to the VOPL
> > > +
> > > +        required:
> > > +          - endpoint@0
> > > +          - endpoint@1
> > > +
> > > +    required:
> > > +      - port
> > > +
> > > +  rockchip,grf:
> > > +    $ref: /schemas/types.yaml#/definitions/phandle
> > > +    description:
> > > +      phandle to the GRF to mux vopl/vopb.
> > > +
> > > +required:
> > > +  - compatible
> > > +  - reg
> > > +  - reg-io-width
> > > +  - clocks
> > > +  - clock-names
> > > +  - interrupts
> > > +  - ports
> > > +  - rockchip,grf
> > > +
> > > +unevaluatedProperties: false
> > > +
> > > +examples:
> > > +  - |
> > > +    #include <dt-bindings/clock/rk3288-cru.h>
> > > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > > +    #include <dt-bindings/interrupt-controller/irq.h>
> > > +
> > > +    hdmi: hdmi@ff980000 {
> > > +        compatible = "rockchip,rk3288-dw-hdmi";
> > > +        reg = <0xff980000 0x20000>;
> > > +        reg-io-width = <4>;
> > > +        ddc-i2c-bus = <&i2c5>;
> > > +        rockchip,grf = <&grf>;
> > > +        interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> > > +        clocks = <&cru  PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
> > > +        clock-names = "iahb", "isfr";
> > > +
> > > +        ports {
> > > +            port {
> > > +                #address-cells = <1>;
> > > +                #size-cells = <0>;
> > > +
> > > +                hdmi_in_vopb: endpoint@0 {
> > > +                    reg = <0>;
> > > +                    remote-endpoint = <&vopb_out_hdmi>;
> > > +                };
> > > +                hdmi_in_vopl: endpoint@1 {
> > > +                    reg = <1>;
> > > +                    remote-endpoint = <&vopl_out_hdmi>;
> > > +                };
> > > +            };
> > > +        };
> > > +    };
> > > +
> > > +...

-- 
Regards,

Laurent Pinchart



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux