Re: [PATCH 6/6] WIP: arm64: dts: renesas: falcon: switch to from SCIF0 to HSCIF0

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Wolfram,

On Mon, Dec 28, 2020 at 12:28 PM Wolfram Sang
<wsa+renesas@xxxxxxxxxxxxxxxxxxxx> wrote:
> Mainly for testing the HSCIF0 node. We could make this switch permanent,
> but we never did for any other SoC. So, I think this is not to be
> applied.

The choice of serial console has to match the bootloader.
That's why we didn't do it for other SoCs where the serial console can be
muxed to different serial instances.

>
> Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>

> --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts
> @@ -14,7 +14,7 @@ / {
>         compatible = "renesas,falcon-breakout", "renesas,falcon-cpu", "renesas,r8a779a0";
>
>         aliases {
> -               serial0 = &scif0;
> +               serial0 = &hscif0;
>         };

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux