[PATCH] can: rcar: Update help description for CAN_RCAR_CANFD config

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The rcar_canfd driver supports R-Car Gen3 and RZ/G2 SoC's, update the
description to reflect this.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
 drivers/net/can/rcar/Kconfig | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/can/rcar/Kconfig b/drivers/net/can/rcar/Kconfig
index 6bb0e7c052ad..a669b9ac8057 100644
--- a/drivers/net/can/rcar/Kconfig
+++ b/drivers/net/can/rcar/Kconfig
@@ -10,13 +10,13 @@ config CAN_RCAR
 	  be called rcar_can.
 
 config CAN_RCAR_CANFD
-	tristate "Renesas R-Car CAN FD controller"
+	tristate "Renesas R-Car Gen3 and RZ/G2 CAN FD controller"
 	depends on ARCH_RENESAS || ARM
 	help
 	  Say Y here if you want to use CAN FD controller found on
-	  Renesas R-Car SoCs. The driver puts the controller in CAN FD only
-	  mode, which can interoperate with CAN2.0 nodes but does not support
-	  dedicated CAN 2.0 mode.
+	  Renesas R-Car Gen3 and RZ/G2 SoCs. The driver puts the
+	  controller in CAN FD only mode, which can interoperate with
+	  CAN2.0 nodes but does not support dedicated CAN 2.0 mode.
 
 	  To compile this driver as a module, choose M here: the module will
 	  be called rcar_canfd.
-- 
2.17.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux