Retrieving a GPIO currently fails, so probing the whole driver fails then. Remove them for now to get a working AVB device for testing. Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> --- arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts index f5f27dece6ee..48801f2bdbe5 100644 --- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts +++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts @@ -34,7 +34,7 @@ phy0: ethernet-phy@0 { reg = <0>; interrupt-parent = <&gpio4>; interrupts = <16 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + //reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; }; }; @@ -49,7 +49,7 @@ phy1: ethernet-phy@1 { reg = <0>; interrupt-parent = <&gpio5>; interrupts = <16 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio5 15 GPIO_ACTIVE_LOW>; + //reset-gpios = <&gpio5 15 GPIO_ACTIVE_LOW>; }; }; @@ -64,7 +64,7 @@ phy2: ethernet-phy@2 { reg = <0>; interrupt-parent = <&gpio6>; interrupts = <16 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; + //reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>; }; }; @@ -79,7 +79,7 @@ phy3: ethernet-phy@3{ reg = <0>; interrupt-parent = <&gpio7>; interrupts = <16 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>; + //reset-gpios = <&gpio7 15 GPIO_ACTIVE_LOW>; }; }; @@ -94,7 +94,7 @@ phy4: ethernet-phy@4 { reg = <0>; interrupt-parent = <&gpio8>; interrupts = <16 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio8 15 GPIO_ACTIVE_LOW>; + //reset-gpios = <&gpio8 15 GPIO_ACTIVE_LOW>; }; }; @@ -109,7 +109,7 @@ phy5: ethernet-phy@5 { reg = <0>; interrupt-parent = <&gpio9>; interrupts = <16 IRQ_TYPE_LEVEL_LOW>; - reset-gpios = <&gpio9 15 GPIO_ACTIVE_LOW>; + //reset-gpios = <&gpio9 15 GPIO_ACTIVE_LOW>; }; }; -- 2.29.2