Re: [PATCH 12/18] arm64: dts: renesas: beacon: Better describe keys

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Adam,

On Sun, Dec 13, 2020 at 7:38 PM Adam Ford <aford173@xxxxxxxxx> wrote:
> The keys on the baseboard are laid out in an diamond pattern, up, down,
> left, right and center.  Update the descriptions to make it easier to
> read.
>
> Signed-off-by: Adam Ford <aford173@xxxxxxxxx>

Thanks for your patch!

> --- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
> +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
> @@ -40,38 +40,38 @@ hdmi0_con: endpoint {
>         keys {
>                 compatible = "gpio-keys";
>
> -               key-1 {
> +               key-1 { /* S19 */
>                         gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
>                         linux,code = <KEY_1>;
> -                       label = "Switch-1";
> +                       label = "Up";
>                         wakeup-source;
>                         debounce-interval = <20>;
>                 };
> -               key-2 {
> +               key-2 { /*S20 */
>                         gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
>                         linux,code = <KEY_2>;
> -                       label = "Switch-2";
> +                       label = "Left";
>                         wakeup-source;
>                         debounce-interval = <20>;
>                 };
> -               key-3 {
> +               key-3 { /* S21 */
>                         gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
>                         linux,code = <KEY_3>;
> -                       label = "Switch-3";
> +                       label = "Down";
>                         wakeup-source;
>                         debounce-interval = <20>;
>                 };
> -               key-4 {
> +               key-4 { /* S22 */
>                         gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
>                         linux,code = <KEY_4>;
> -                       label = "Switch-4";
> +                       label = "Right";
>                         wakeup-source;
>                         debounce-interval = <20>;
>                 };
> -               key-5 {
> +               key-5 { /* S23 */
>                         gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
>                         linux,code = <KEY_5>;
> -                       label = "Switch-4";
> +                       label = "Center";
>                         wakeup-source;
>                         debounce-interval = <20>;
>                 };

Wouldn't it make sense for the linux,code properties to reflect this, and thus
change them to KEY_{UP,LEFT,DOWN,RIGHT,ENTER} (or SELECT, or OK)?

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux