Re: [PATCH v5 2/8] dt-bindings: media: max9286: Document 'maxim,initial-reverse-channel-mV'

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

On Mon, Nov 30, 2020 at 03:00:48PM -0700, Rob Herring wrote:
> On Mon, Nov 16, 2020 at 02:52:59PM +0100, Jacopo Mondi wrote:
> > Document the 'initial-reverse-channel-mV' vendor property in the
> > bindings document of the max9286 driver.
> >
> > The newly introduced property allows to specifying the initial
> > configuration of the GMSL reverse control channel to accommodate
> > remote serializers pre-programmed with the high threshold power
> > supply noise immunity enabled.
> >
> > Reviewed-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
> > Signed-off-by: Jacopo Mondi <jacopo+renesas@xxxxxxxxxx>
> > ---
> >  .../bindings/media/i2c/maxim,max9286.yaml     | 23 +++++++++++++++++++
> >  1 file changed, 23 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> > index 9ea827092fdd..f61234d204fa 100644
> > --- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> > +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> > @@ -51,6 +51,26 @@ properties:
> >    '#gpio-cells':
> >      const: 2
> >
> > +  maxim,initial-reverse-channel-mV:
>
> Use standard unit suffix.
>

Which one ? :)
I see in v5.10 one 'mV', three 'mv', one 'millivolts', several
'microvolts'.

I'll go with the majority and make this
'maxim,initial-reverse-channel-mv'

Thanks
   j

> > +    $ref: '/schemas/types.yaml#/definitions/uint32'
> > +    minimum: 30
> > +    maximum: 200
> > +    default: 170
> > +    description: |
> > +      Initial amplitude of the reverse control channel, in millivolts.
> > +
> > +      The initial amplitude shall be adjusted to a value compatible with the
> > +      configuration of the connected remote serializer.
> > +
> > +      Some camera modules (for example RDACM20) include an on-board MCU that
> > +      pre-programs the embedded serializer with power supply noise immunity
> > +      (high-threshold) enabled. A typical value of the deserializer's reverse
> > +      channel amplitude to communicate with pre-programmed serializers is 170mV.
> > +
> > +      A typical value for the reverse channel amplitude to communicate with
> > +      a remote serializer whose high-threshold noise immunity is not enabled
> > +      is 100mV.
> > +
> >    ports:
> >      type: object
> >      description: |
> > @@ -221,6 +241,7 @@ required:
> >    - ports
> >    - i2c-mux
> >    - gpio-controller
> > +  - maxim,initial-reverse-channel-mV
> >
> >  additionalProperties: false
> >
> > @@ -243,6 +264,8 @@ examples:
> >          gpio-controller;
> >          #gpio-cells = <2>;
> >
> > +        maxim,initial-reverse-channel-mV = <170>;
> > +
> >          ports {
> >            #address-cells = <1>;
> >            #size-cells = <0>;
> > --
> > 2.29.1
> >



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux