The fact the audio worked at all was a coindicence because the wrong
gpio enable was used. Use the correct GPIO pin to ensure its operation.
Fixes: a1d8a344f1ca ("arm64: dts: renesas: Introduce r8a774a1-beacon-rzg2m-kit")
Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
---
arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
index 5c09e64001cc..ee7809e8db07 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
@@ -151,7 +151,7 @@ reg_audio: regulator_audio {
regulator-name = "audio-1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- gpio = <&gpio_exp2 7 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio_exp4 1 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
--
2.25.1
